Product description. OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
OxiClean can be used on many surfaces, indoors and out. For removing tannin stains from concrete, first sweep the surface and hose it off. Getting the concrete uniformly damp before you add a cleaner is always a good idea, because doing so will yield more even results.
Although it's possible to scatter the OxiClean powder on the wet concrete and then scrub with a stiff broom, you'll probably get a more uniform result by mixing the powder with water first. Use four scoops of powder per gallon of water. The powder mixes best into warm-to-hot water.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
For lingering stains, rewet the surface and sprinkle it lightly with Oxiclean. (Or you can make your own oxygen bleach.) This won't harm your lawn or plants lining your driveway, unlike chlorine bleach. Again, use the broom's bristles to scrub the area, then wait for 10-15 minutes.
Another relatively safe and environmentally friendly solution for cleaning concrete is an oxygen bleach product, such as OxiClean. Just be sure to wear rubber gloves, as bleach products can be tough on skin. Sprinkle the powerful solution over the entire patio and scrub it with an ordinary push broom.
Cleaning concrete with muriatic acid can be a highly effective solution if used correctly, providing ultra-bright white concrete and removal of many types of stains. In one application, you can remove rust stains, oil stains, algae, and paint splatter with a quick chemical application followed by pressure washing.
Scrub the concrete with a nylon-bristled brush and then rinse thoroughly with the garden hose. For extremely heavy stains, a power washer provides a much stronger stream of water to blast away the grime. Use a hose to rinse greenery after the patio is clean.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Mix a solution of 1/8 of a cup liquid dishwashing detergent, ½ cup baking soda, and one gallon of water. Pour over the stain. Use a soft brush to scrub the stain away. Rinse the area.
Wash the concrete > Mix a solution of ⅓ cup powdered laundry detergent, such as Tide, per gallon of hot water; the granules will act as a mild abrasive. Working in sections, pour some solution onto the floor and scrub with a stiff bristle brush. Wait about 10 minutes for dirt to loosen, then repeat.
Cleaning outdoor patio cushions and furniture with OxiClean™
From outdoor cushions to mesh patio furniture, OxiClean™ Versatile Stain Remover can tackle it all, making your patio pretty again. Always refer to packaging for directions and use only on water washable upholstery. Fill to line 4 per gallon of water.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
OxiClean™ Bleach Mold & Mildew Bathroom Stain Remover makes it easier to clean mold stains because it has bleach, which helps to remove mold and mildew stains on non-porous bathroom surfaces such as tiles, sinks and tubs.
Recipe #3 – Mix 1/3 cup Tide to 1 gallon of warm water. Any of these should work well for cleaning unsealed cement garage floors. SCRUB THE FLOOR – Pour your warm water solution onto a section of the garage floor and start scrubbing. Begin at the back of the garage and move outward.
Wash the floor
Grab a mop and a bucket and mix up one of the following solutions: Baking soda (1/2 cup) mixed into a large bucket of warm water. Liquid dish soap (2 tsp) + white vinegar (1 cup) mixed into one gallon of warm. Tide [or other powdered laundry detergent] (1/3 cup) mixed into one gallon of warm water.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
If your area is more prone to algae and mold, then you may want to wash your concrete more often. You should pressure wash your concrete at least once a year to protect your concrete and the value of your home. Using a concrete sealer can also prevent damage to your concrete after it has been washed.
Simple Green Oxy Solve Concrete and Driveway Cleaner can be used with a power washer or for manual cleaning of concrete surfaces including driveways, sidewalks, patios, and walkways.
Mix one cup of bleach to 1 gallon of water. It can then be sprayed onto the concrete and scrubbed. Most of the mold should be removed through this method. A less aggressive method is to mix 1 cup of vinegar with 2/3 cups of water in a spray bottle.
OxiClean™ is a Versatile Stain Remover in a powder form that is activated when added to water (warm or hot water work best). Oxygen is released and targets the stains, rather than the fabric, removing many tough stains on water-washable clothing, carpet, upholstery, and hard surfaces both inside and outside the home.