Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
Murphy Oil Soap is safe to use on all finished hardwood floors, ceramic tile, laminate, and vinyl floors. With It's 98% natural ingredients, it won't harm them but extend their life by using it on regular basis. You just need to rinse your mop thoroughly before cleaning.
You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer's instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.
Do NOT clean your floors with Murphy's Oil Soap, Mop and Glo, Orange Glo, Swiffer Wet Mop, furniture polish such as Pledge, vinegar, ammonia, or any pine cleaners! All of these cleaners, over time, will dull and damage the finish.
Already diluted, Murphy Oil's Squirt & Mop cleaner is designed to spray directly onto the floor. First, prepare a mop and a bucket of water. Spray the floor with Murphy Oil's Squirt & Mop and then follow up with a damp mop. Continue as you go, spraying first and then mopping away.
Such products have a high potential of ruining the finish of your wood. They can react with the polyurethane seal, completely destroying it, or create an unsightly, sticky, oily residue that can make your floor cloudy or slippery.
Sweep or vacuum, then mop with a commercial wood floor cleaner or solution of a quarter-cup of dish soap and a gallon of warm water to lift any lingering grime. Give the floors a final pass with a clean, water-dampened mop to remove any cleaner residue. Dry completely with a soft, clean towel.
For heavier cleaning and to restore a durable shine, use a regular microfiber mop and gentle cleaner specifically designed for finished wood floors, such as Murphy® Oil Soap.
Don't use straight ammonia, alkaline products or abrasive cleaners. They'll dull or scratch the finish. Don't rely on lemon juice or a vinegar-and-water solution to clean hardwood floors. "I don't recommend using vinegar or lemon juice, at least not in large quantities, as these can damage the floor's seal," said Wise.
An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge. To ensure the area is thoroughly clean, rinse with warm water and dry.
Murphy Oil Soap hardwood and wood cleaner is specially designed to clean both finished wood and non-wood surfaces so they maintain their beautiful shine at all times. The Murphy Oil Soap wood cleaner aims to bring out wood's beauty in a gentle and natural way (98% Natural Wood Cleaner.
Pine-Sol is safe on hardwood floors and can be used to clean and disinfect them. What is essential is to use the right concentration and correctly follow the instructions: Sweep or vacuum the floor to remove loose dirt and debris. Take ¼ cup of Pine-Sol and mix with a gallon of water in a bucket.
Water You Using to Clean Your Floors? You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won't damage them.
If you're dusting or cleaning your table, in additional to other wood furniture or knickknacks, a multipurpose solution like Murphy® Oil Soap Orange Oil Cleaner can do the trick. Real Simple recommends spraying or applying your product onto a dusting cloth instead of the surface itself.
Murphy Oil Soap, formulated as a safe cleaner for finished wood, cleans kitchen cabinets as well, even if the cabinets are a laminate rather than wood. Oil soap does not leave behind a residue, so it does not require rinsing.
Original Author. Ok, I came up with my own solution, so if anyone ever needs it: 2 cups white vinegar in a gallon of water, mop vigorously and let dry, repeat as needed.
Many zoos, rescues and animal shelters use a dilution of Murphy Oil Soap (original) and water to bathe various animals in their care, because Murphy Oil Soap is a natural, non-toxic, gentle cleanser that contains Citronella Oil which repels insects such as fleas and ticks, and also has anti-fungal, anti-bacterial, anti ...
Hardwood Floor Protection with Area Rugs
In theory, area rugs protect your hardwood floors by taking the brunt of the daily traffic, furniture shuffling and the like. That's all true — area rugs prevent sunlight damage, furniture scratches, debris, dust and water from outdoors, etc.
Yes, hardwood floors are beautiful, but leaving them as-is can lead to scratches, injuries, and more. Covering up the hardwood in your home is not only a good idea, but a necessary step for maintaining the quality of your flooring and the safety of your family.
On average, a hardwood flooring finish lasts approximately ten years. But with proper care and maintenance, it can last much longer.
And stains, marks and scratches can be removed easily from waxed floors using Murphy Oil Soap.
No, Murphy's Oil Soap is not antibacterial.
Answer: Yes, this product has an expiration date of one year after the manufacture date. This is typically located on the back of the bottle, embossed above or below the label.