Do Not Use On Granite or Marble. If you have soft surface countertops like granite or marble, step away from the magic eraser. You can use them on laminate, Corian, quartz, and other solid surface countertops, but do a spot check.
Use a white, light-duty Scotch-Brite™1 scrub pad and a nonabrasive cleanser such as a general purpose surface cleaner. 3. A Magic Eraser can be used to remove residual stains.
Grease, fat and oil – use a small amount of dilute bleach and rub with a microfiber cloth. Make sure you rinse the area thoroughly with warm water afterwards to prevent staining. Minerals, lime scale and hard water – apply lime scale remover or vinegar with a microfiber cloth and leave for a few minute before rinsing.
Keep nail polish remover, bleach, detergent, permanent markers or inks, and oil soaps away from your Corian® Quartz. Heat Damage Prevention - To maintain the beauty of Corian® Quartz, do not place hot skillets or roasting pans directly onto the surface.
Magic eraser may also be used to fight tough quartz stains, simply wet the magic eraser and apply in gentle, circular motion. Clean the area thoroughly with water and dry with a clean towel after. For tough to fight grease residue, you may use degreasing cleaners.
Before you retire to the couch, rinse out your Magic Eraser and give your newly freshened surfaces a water wipe down, too. If what you cleaned will come in contact with food, you'll need to wipe it with a wet rag or paper towel, so it will be ready for the next time you meet again.
Never put hot pans, in particular cast iron pots or hot casserole dishes directly on a Corian® top or in a sink. Such heat can damage any surface. Preventing Other Damage Be aware of what your Corian® surface has been exposed to. Harsh chemicals may damage the surface (e.g. paint removers, oven cleaners, etc.)
Wipe the countertop surface with the help of an ammonia-based spray cleaner or warm soapy water for minor residue buildups, or with an abrasive cleaner for heavier buildups. This will help to remove minor scratches, scorch marks, and very stubborn stains from the Corian countertop and will revitalize it.
Corian is a branded name used in reference to solid surface countertops. These surfaces are a step up from laminate but still lack the durability and aesthetics that would allow them to compete with natural stone such as quartz. This is one of the primary reasons Corian offers poor resale value compared to quartz.
BAR KEEPERS FRIEND Powdered Cleanser 12-Ounces (1-Pack)']
A: Bar Keepers Friend should be safe on Corian as long as it is for occasional use only.
Use a multi-surface cleaner such as Windex® Multi-Surface Disinfectant Cleaner to clean and shine countertops made of sealed granite, sealed marble, Corian®, Formica® and more.
Denatured alcohol is the preferred solvent for cleaning DuPont™ Corian® solid surface products.
Corian® Solid Surface has been, and continues to be, the most popular brand of solid surface material in the world for over four decades.
Do Not Use On Granite or Marble. If you have soft surface countertops like granite or marble, step away from the magic eraser. You can use them on laminate, Corian, quartz, and other solid surface countertops, but do a spot check.
Because Corian has been manufactured with Resilience Technology ™ in a way that allows sanding, cutting, carving and so forth, these inherent benefits also mean that they react much like stone and wood worktops if treated harshly and the surface will show scratch marks, dull areas, and heat damage.
In your Corian® sink, feel free to use a light abrasive cleanser, such as Comet, Ajax, or Soft Scrub, and a blue Scotch-Brite pad. To keep a lustrous sheen to your countertops, regular use of a polisher such as Countertop Magic is recommended.
This material is designed to withstand everyday wear and tear and last for decades, usually up to 50 years, without the need for major repair or replacement. However, should it be damaged, the solid surface can be repaired in the event of minor damage.
Some ideas for removing stains from your Corian worktops: Spray lemon juice or vinegar on the stain and leave for a few minutes. Then rinse thoroughly with clean water and dry properly. A solution of spirit vinegar and bicarbonate of soda can be rubbed on in small circular motions and rinsed off with clean water.
If the stain persists, moisten a cloth with Goo Gone®4, or a comparable product, and rub it into the stain. Rinse thoroughly with warm water to remove any cleaner residue.
Magic Erasers are abrasive, so avoid using them on delicate countertops such as marble and granite. Not only can you damage the sealant but the eraser may make the countertop appear dull. All of these cleaning products can cause more harm than good.
The drier, the more abrasive it is. Wear rubber gloves when working with the Magic Eraser! (Unless you want that deep mechanical peeling effect on your hands). Test it in an inconspicuous place first.
1. Don't use them dry. Part of the magic of these erasers is that all you have to do is add water to activate them. However, it turns out that these plushy pads are even more abrasive — and can, therefore, do more damage — when dry, so adding water actually helps soften them.