Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.
Are chlorine and shock the same thing? SKIMMER NOTES: No. Chlorine and shock are not the same thing. Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool.
The most common form of granular shock is called Calcium Hypochlorite, known as Cal Hypo. This type of shock is much stronger than liquid shock typically has 65 to 75 percent available chlorine.
Sodium hypochlorite (also known as liquid chlorine) is another frequently used option for shocking pool water. This is a common choice in pool shock because you can pour the solution directly into the pool without having to dissolve the chlorine in water beforehand.
Unlike liquid chlorine solutions that are nothing more than chlorine mixed into water, chlorine tablets are typically composed of chlorine and a stabilizing component which is usually cyanuric acid or CYA.
Liquid Chlorine has the shortest shelf life of all your pool chemicals, losing up to 50% or half of its potency six months from when it was first opened and up to 90% after a year.
It Should Not Be Done Together
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
You should wait one hour per pound of shock product added, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool. As a reminder, you want your pH to be between 7.2 and 7.8ppm and your free available chlorine to be 1-4ppm for safe swimming.
What type of chlorine for your above ground pool? Liquid chlorine is often used in large commercial pools and is delivered into large 50-gallon vats. This chlorine composition shows its basically highly concentrated bleach.
So, what is pool shock, exactly? "Shocking” refers to the process of adding chlorine or non-chlorine pool chemicals to the water in order to raise the "free chlorine” level. The goal is to raise this level to a point where contaminants such as algae, chloramines and bacteria are destroyed.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Liquid chlorine is generally less costly than granular shock and comes in refillable containers, where granular shock does not. Liquid chlorine does not need to dissolve in your water as it is already in liquid form. In addition, liquid chlorine is non-scaling and leaves no residue.
Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.
So, what exactly happened? In the coke there is a small amount of phosphoric acid, which acts as the reactant. When the phosphoric acid reacts with the pool chlorine, calcium hypochlorite, it releases a gas. The coke and the pool chlorine also create an exothermic reaction, which means that heat is released.
Low chlorine levels often cause green or hazy water, so if your water looks a little cloudy and you haven't shocked in a while, adding shock is the first step.
Neither will chlorination be effective with a diffuser and without a pump. The best thing to do is to apply liquid chlorine in the pool. Then, you have to circulate the pool manually with the use of a telescopic pole or paddle. This will ensure the chlorine disperse well.
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
As long as you test and actually KNOW what you have and what you need in the pool, you can manage it any which way that works to keep the levels up. Around here we usually suggest that you keep your chemicals "separate", that is, add exactly as much CYA as you need, then add exactly as much chlorine as you need.
Often, it will look something like this. 12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water. Shock Dosage: 2 gallons of shock per 10,000 gallons of water.
When is it safe to go into a pool after it's shocked? In general, it's recommended that you wait up to 24 hours to hop into a pool after it's been shocked, depending on the size of the pool, Alan says.
Keep your pump and filter running. Give the shock a good 12 to 24 hours to work it's magic. If the algae hasn't cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.
2. Bleach. Also known as sodium hypochlorite, simple household bleach (which contains 5.25 percent of sodium hypochlorite, the active ingredient in bleach) can get stains out of grout that the baking soda couldn't. Bonus Tip: Bleach can also be used to shock a pool.
Liquid chlorine may be a good choice if you have a large pool, but the costs associated with it, and the available chlorine per pound could mean that chlorine granules are the better option. In the end, both liquid chlorine and chlorine granules will do their job and keep your pool clean and clear.