Household bleach (the same as you use for your laundry) and pool chlorine are the same thing. They are identical in every way, with the exception of strength.
Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.
Answer: It is true that pool chlorine is stronger than bleach. For bleach and water to be the same strength as pool chlorine and water, you would have to adjust the ratio, increasing the bleach and reducing the water. But no matter which chlorine you use, make sure to test a small area before doing the job.
Typical pool chlorine is actually a chemical compound made up of 65% calcium hypochlorite with the remaining 35% made up of calcium and other inert ingredients. Household bleach, on the other hand, is usually only 6% chlorine and a different type at that.
Oxygen bleach has safer molecules than regular bleach, and it won't form more cancerous materials like chloroform either. Chlorine bleach is more reactive, and therefore it can damage more things. But non-chlorine bleach, like hydrogen peroxide, is still a chemical that needs to be used correctly. So it's relative.
There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you'll still need to use some chlorine. A fourth alternative is PHMB, which doesn't require the use of any chlorine. All four have drawbacks, including cost.
Common unscented household bleach (sodium hypochlorite) works well to shock a pool.
What can you use instead? Bromine — considered a safe substitute for chlorine. Looks for BCDMH tablets, which are typically 66% bromine and 27% chlorine. If unable to find, you can use just bromine but it may leave the water a dull green color.
Pros of Saltwater Pools
There's less chlorine and less of the heavy chemical scent and content. They're gentler on the skin, with less irritation to the eyes, hair and swimsuits. The water has a softer, silkier feel to it compared to chlorine water. They have lower maintenance costs than chlorine pools.
It is possible use use the tablets in your large wading pool. However, this is not economical and it will take a large amount of tablets to clean your pool. Unless you have a major supply of these tablets on hand, I would not suggest using them to clean a pool.
It is a good idea to wait at least 20 minutes after adding the water balancing chemicals. If you use calcium chloride in your pool, you should wait at least 2 hours to swim.
Bleach is safe and the only chemical you should be using in your pool unless cleaning pool tile with baking soda. So yes, you can use bleach to keep your pool water chemistry balanced.
It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.
If you need to mildly shock a 30,000-gallon pool by raising the free chlorine concentration to 5 ppm, you need 2.5 gallons of bleach. To raise it to 10 ppm, you need 5 gallons.
Mineral Swim is the only system of it's kind combining Australian made ozone water purification technology with 100% natural Dead Sea minerals to make it the safest, healthiest swimming pool about.
What Does Baking Soda Do For a Pool? Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.
High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.
Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.
*1 gallon of chlorinating liquid delivers the same amount of chlorine as 2 chlorinating tablets.
Green algae, unlike its black counterpart, is a true algae; it isn't resistant to chlorine, so you can control it by shocking the pool. If you don't want to spend a lot of money on expensive pool chemicals, you can shock with household bleach.
Of course, too much chlorine in pool water can be dangerous. Exposure to over-chlorination can provoke asthma, lung irritation, and potentially skin and eye irritation. As well as being potentially bad for you, it's bad for your pool.
What is this? If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.
Best time is either after sunset, or when you need it. Bleach doesn't lose concentration overnight unless it has something to work on. In fact, a good way to tell if your pool is in good shape is to do an overnight chlorine test. Ideally, the FC at night should be the same as the FC level the next morning.
BioLab Fire
It not only brought the threat of high winds, fallen power lines and deadly waters, but also the potential for hazardous air conditions caused by chemical breaches in the nearby chemical plant. The loss of this plant will result in a nationwide chlorine shortage that will be felt through the 2021 season.
Pools can immediately turn green after shocking when they have metals like copper in the water. These metals oxidise when exposed to high levels of chlorine which makes the pool water turn green. Adding a metal control product such as Zodiac Metal Remover will help to restore the pool water.