Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Pour ⅓ cup of Clorox® Disinfecting Bleach into 1 gallon of water in a plastic bucket or container. Apply bleach solution using a brush or broom on horizontal surfaces, and a sponge or mop on vertical surfaces. Heavily soiled surfaces may require additional scrubbing. Wait 6 minutes for disinfecting.
Apply the bleach solution
Allow the bleach solution to contact the surface for up to 15 minutes. Work in smaller sections if the patio is too large to finish in that time.
After disinfection with bleach solutions, surfaces should be rinsed and dried. Bleach can be irritating to skin and mucous membranes, so any residue should be removed prior to returning animals to the environment.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Scrub the concrete with a nylon-bristled brush and then rinse thoroughly with the garden hose. For extremely heavy stains, a power washer provides a much stronger stream of water to blast away the grime. Use a hose to rinse greenery after the patio is clean.
For lightly soiled concrete, you can remove dirt by using bleach mixed with water. Add 1/8th cup of liquid dishwashing detergent to the solution and pour it into a spray bottle. Spray the solution onto the surface, and let it sit for a few minutes. Scrub with a nylon-bristled brush.
This recipe also works well as a pressure washer cleaning solution for concrete or brick. Apply baking soda directly to stain on concrete and let it sit for a few minutes. Pour vinegar on the baking soda and the mixture will start to fizzle. Then, apply laundry detergent and scrub with a stiff brush.
Mixing vinegar and bleach together releases a poisonous chlorine gas, which can be fatal if inhaled at high enough concentrations.
Vinegar is an all-natural solution for cleaning concrete. It kills mildew and mold, removes grime, and helps treat set-in stains. Before cleaning concrete with vinegar, it's essential to dilute it so you don't affect your sealer.
If your area is more prone to algae and mold, then you may want to wash your concrete more often. You should pressure wash your concrete at least once a year to protect your concrete and the value of your home. Using a concrete sealer can also prevent damage to your concrete after it has been washed.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria. However, vinegar's acidic nature may be terrible for other materials.
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
Interior Concrete Floors:
Clean with water. Use a mild detergent as needed. Such as Dove or Ivory dish soap. Do Not use Dawn, Simple Green, Ammonia or harsh cleaners as they will work to damage and even strip the wax.
Combine 1/4 cup of liquid bleach with 1 gallon of hot water in a large bucket. To avoid damaging your lawn or walkways, always dilute your bleach and control your runoff when rinsing. Soak your brush in the solution and scrub the entire area until it's fully saturated.
Bleach needs to be heavily diluted when used in cleaners and is only safely mixed with plain water. It is critical to note that bleach and other ingredients combined can put off extremely dangerous, toxic fumes. This is why when we make our own cleaning products, we nearly always avoid bleach as an ingredient.
Bleach can irritate the skin and eyes. Breathing in bleach over a long period of time can increase your risk of cancer. A dangerous gas can be formed when bleach is combined with certain chemicals (like ammonia). Bleach causes the buildup of chloroform in the air.
What happens if you don't dilute bleach? You might damage what you're trying to clean, according to Johnson. Full-strength (non-diluted) bleach can be damaging to the surface and be harsh on your skin.