Once a week, wood floors should be cleaned in high traffic areas with a damp mop. Low traffic areas can be done less frequently, like once a month or once a quarter. Unsealed wood floors are more susceptible to water, so make sure that the mop is just slightly damp.
In most homes, the best wood floor cleaner is plain old soap and water, and the only tools you need are a broom, vacuum, and mop. The best mop for wood floors is a microfiber flat-head or string mop you can easily wring out.
Avoid using water and vinegar, soap-based cleaners, wax or steam cleaners on hardwood floors. Vinegar and water can dull the floor's finish over time, while soap and wax leave a residue. Steam cleaners put heat and excessive water on your floor, which can lead to cupping and long-term damage.
Water You Using to Clean Your Floors? You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won't damage them.
Ammonia. Ammonia is a pungent chemical that has many cleaning uses in your home, but it should never be used on hardwood floors. “The ingredient damages the surface and dissolves the lignin in the wood,” explains Leanne Stapf, chief operating officer at The Cleaning Authority.
An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge. To ensure the area is thoroughly clean, rinse with warm water and dry.
Pine-Sol is safe on hardwood floors and can be used to clean and disinfect them. What is essential is to use the right concentration and correctly follow the instructions: Sweep or vacuum the floor to remove loose dirt and debris. Take ¼ cup of Pine-Sol and mix with a gallon of water in a bucket.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
The good thing about the fabuloso cleaner is that it can be generally used for all the wood floor surfaces. It is a good multi-purpose cleaner of which you can practically use to effectively clean the floor surfaces around your home.
Cleaning your wooden floors with Lysol®
You can clean polished wood or non-porous hardwood floors with Lysol® . If you're just looking to – you can use Lysol® All-Purpose Cleaner to clean and disinfect your floor surface without causing damage to the wood.
Vinegar is an acid and hardwood floors need a pH neutral or close to it cleaner. When mixed with water, the solution's acidity is drastically lowered and it becomes an effective method to wash hardwood floors. The vinegar and water mixture cuts through dirt and grime, leaving a streak-free and naturally clean floor.
Bona's mop distributes cleaning solution more evenly than the Swiffer WetJet. Bona's mop head is significantly wider (15 inches) than Swiffer's (9 inches), which makes it easier to clean large rooms but more difficult to navigate in small spaces. Bona's spray mop comes with a reusable microfiber mop pad.
You can use shark Steam mop on Wood floors but only if they are sealed! If your floors are not, water from the steamer will be absorbed by the wood and damage your flooring from the inside out. Beside sealed hardwood, Shark steam mop can be used on Bamboo, Marble and Vinyl plank floors as well.
Ultimately, traditional mops are still the best option for deep cleaning. You can put more pressure on the head, and you can use any cleaning solution (rather than the Swiffer-only options) and as much of it as you need.
Clorox can absolutely be used to clean and disinfect hardwood floors. There are a range of Clorox products that can be used for wiping down hardwood floors. Clorox disinfecting wet mopping cloths can be used with a Swiffer mop or similar cloth mop.
Disinfect Regularly.
For a general cleaning, you can use a product like Murphy® Oil Soap, which is safe for use on wood surfaces. Once you've cleaned the surface, it's time to disinfect, by attacking germs with a spray solution of water and white vinegar.
What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.
What are the ingredients in Fabuloso® or Fabuloso® Complete? Fabuloso® Complete Sparkling Citrus Ingredients: Water, Sodium Dodecylbenzenesulfonate, Sodium Chloride, Lactic Acid, C9-11 Pareth-8, Fragrance, Colorant.
To mop floors with Fabuloso cleaner, mix ¼ cup of Fabuloso multi-use cleaner with a gallon of water. Use warm to hot water to maximize antibacterial capabilities. Mop in sections on a pre-swept floor, making sure to apply an even coat over the entire floor.