Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
For energy efficiency best time to run the pool's filtration system is during off-peak hours when the electricity demand is lower. This time is typically between 8 p.m. - 10 a.m. Also, to warm the pool you can run it during the day, to cool it at night.
If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer. Note that you need to run your pool pump longer during summer because algae grow more in warm temperatures.
Ideally, pool pumps should turn over at least once daily for about 8 hours. This doesn't mean the 8 hours must be consecutive; you can run it for a few hours then wait to rerun it later in the day.
Most pool filtration systems are sized to circulate and filter the water twice in 8 hours. We recommend that you run your pool pump 6-8 hours in the winter and 10-12 hours in the summer.
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
Without Chemicals
If a parent chooses not to use chemicals in the kiddie pool, the water must be drained after the children are done using it. This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day.
As a guide to running circulation, you should aim to "turn” the full volume of pool water through the filter cartridge once per day. Typically in most splash pools, using standard equipment, this is 4 hours per day (that the pump should be turned on).
Helpful tips to keep your pool and its equipment safe during freezing temperatures. Run your pool pump continuously when temperatures are near or below freezing. You don't need to run your heater, moving water likely will not freeze. Disconnect any aerators and lines to slides.
So if you have to leave it running for a week it shouldn't make a big dent in the electric bill. Having to spend the money on getting the pool back in shape will probably cost more than leaving it on anyway. I would make sure you fill the pool water as high as you can though since you will be gone for a week.
Keep it on a low shelf so it won't fall or roll. If you keep your motor outdoors all winter, you could build a 'lean-to' with lumber or plastic for snow, rain and tree branches, but keep good air flow around the motor, and don't wrap it in plastic, which traps moisture inside the motor.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
Even if you have your pool covered, some debris may still get in it during the winter. For this reason, you should consider running your pump on occasion whenever the outdoor temperature is between 35 and 65 degrees. Around four to six hours should be sufficient to remove debris and help promote good circulation.
As long as necessary. The point of running your pool pump in the winter is to keep your water moving, which prevents it from freezing should temperatures get too low. So ideally, run your pump (and keep it running) whenever temperatures start getting close to 32 degrees Fahrenheit, the freezing point of water.
Shock-chlorination is an essential and effective method of cleaning the pool. But you need to have the pump circulating the water for this to be effective.
Low flow = poor circulation which will lead to algae in the pool. Bottom line, the filter must be backwashed on a regular basis to ensure that your pool water is clear. "When do we need to backwash?" - It is recommended to backwash your filter once every 4-6 weeks of regular use.
On average, pool pumps last eight to 12 years before needing replacement. Over time, it's normal for pool parts to begin to wear down. In addition, swimming pool technology has come a long way in the last decade.