They are designed to cycle on and off, but a standard home furnace should only turn on and off between three to eight times per hour. That means normal heating cycles last from seven to 20 minutes.
The most common reason for short cycling is that the air filter is dirty and, therefore, non-functional. This is because the heat exchanger can retain heat to such an extent that it overheats. On the bright side, you will not have to look up “HVAC repair near me” as you can replace the filter on your own.
If your air filter is too dirty, it will restrict airflow. Your furnace will then shut off early to avoid overheating. We encourage changing flat filters once a month, and pleated filters every three months. It's simple to stay on top of changing your filter by setting up a Filter Reminder on your thermostat.
With an effective air delivery system and a well-insulated home, this should be long enough to establish your preferred temperature throughout the building. After resting for approximately five to 10 minutes, your furnace will likely cycle on again.
Most furnaces kick on and off between three to eight times an hour, depending on things like outdoor air temperatures, the furnace's age, and how much insulation you have. That's why, instead of asking how often a furnace should cycle, it's best to stay alert to changes in how your furnace is running.
This is commonly caused by a dirty air filter. Once high temperatures are reached within the equipment, the limit switch shuts down the heating cycle for safety reasons. Then the furnace must cool down before another cycle starts – but the issue just happens again.
A furnace “short cycles” when it turns off before reaching the desired temperature. This means that if your thermostat is set to 72 degrees, the furnace may shut down at 65 or 68 degrees, but will never reach 72 degrees. Short cycling can also be used to describe a furnace that turns on and off too often.
During the coldest days in winter, it is normal for a furnace to run almost constantly to keep the home warm. As long as the furnace is running efficiently and not making strange noises, the constant operation is likely nothing to worry about. But in general, your furnace should not constantly be running.
The simple solution: Turn your furnace off and check the filter. If it's dirty or it's been 3 months or more since you changed it, put a new, high-quality filter in place.
HVAC maintenance companies explain that a furnace will normally perform an average of two to three cycles in an hour, with each cycle lasting 10 to 15 minutes. But to keep temperatures at a comfortable level during cold weather, a furnace might need to increase this range to three to 10 cycles.
Short cycling is a common sign of a bad flame sensor. The sensor thinks that there isn't a flame, so it shuts off the gas as a safety mechanism. Except, there is a flame and without the gas to supply it, it dies. This is a frustrating problem, but an HVAC technician can fix it.
They are designed to cycle on and off, but a standard home furnace should only turn on and off between three to eight times per hour. That means normal heating cycles last from seven to 20 minutes. You can tell your furnace is short-cycling if that on/off cycle happens every couple of minutes.
The most common problems that cause a furnace to short cycle include: An overheating heat exchanger. A dirty flame sensor rod. A blocked flue pipe.
Dirty Air Filters
So, the furnace is triggered to stop, then it cools down only to fire back up again. This short cycling continues to repeat until the furnace receives the airflow it needs. Dirty air filters are one of the most common reasons behind furnace short cycling.
Routine Furnace Cycles and How Often the Heater Runs
So is running as long as 20 minutes. Even running every seven or eight minutes may not be a problem, as other factors could lead to more frequent cycling. Outside temperature, for example, could contribute to how fast or slow the furnace cycles.
Your thermostat could also cause the HVAC system to cycle on and off rapidly, a process known as short cycling.
3- Furnace Shuts Off After 15 Minutes Due to a Dirty Air Filter. If your furnace shuts off after 15 minutes, a dirty air filter is likely blocking your heat.
"Your system's [furnaces] aren't designed to run in temperatures that are below-zero for long periods of times," Marchand said. To help alleviate some of the stress off of systems during these cold temperatures, set your thermostat a few degrees lower than what you're used to.
Generally, a furnace cycle lasts anywhere between three to 10 times every hour; however, the frequency changes depending on several factors. If your furnace is cycling on and off more frequently than it should, there could be a problem with one of its internal components.
Short Cycling Causes
Here are a few problems that may cause furnace short cycling: Air Filters – Severely dirty air filters may cause this issue because they restrict the airflow to your system. Replace the filter and set a reminder to do this regularly. Blocked Vents & Registers – This is another easy fix you can try.
Customers often ask, “Is furnace short-cycling dangerous?” While short-cycling isn't inherently dangerous, it can reduce energy efficiency, cause safety problems, and increase wear and tear on your home's HVAC system.
When the Furnace Does Not Heat the Air. The furnace not heating up is the most typical sign of a clogged exhaust vent. This occurs when the furnace inducer fan does not activate the pressure switch when it should. The inducer fan is responsible for moving air around the combustion chamber.