The typical cost range to replace a kitchen sink is between $216 and $642, with a national average cost of $429. Some of the main factors in calculating kitchen sink replacement costs are the type and material of the sink, the number of basins, the cost of labor, and the home's geographic location.
Average Cost of Sink Installation
The average cost hovers around $420, with a typical price range of $216 to $628. If you choose to install a luxury sink, have countertop work or need additional things like faucets, you may want to budget as much as $1,700 for your sink installation costs.
In short, yes, it is possible to replace a kitchen sink without replacing the countertop. However, in order to prevent any damage from occurring to the countertop, it's recommended that a professional handle the replacement.
Replacing a kitchen sink is straightforward, but also a time-consuming task. There are sinks of all shapes, sizes and materials, some of which are trickier to work with than others.
Kitchen sink replacement is a DIY project that makes a big impact. Kitchen sinks get worn out over time due to daily use. A new sink renews the beauty of your kitchen and adds functionality to your space. Using a few tools, the right equipment and a little know-how, you'll be enjoying a new kitchen sink in no time.
So, to reiterate, YES, plumbers certainly can install sinks, and they do it meticulously, carefully and properly.
Replacing a sink is no easy task, it's a heavy duty item and depending on your home, it could be embedded into the masonry. There are a few easy repairs for sinks such as tightening taps or unclogging the drains but sometimes you'll need a professional to tackle the job, especially when it comes to replacing the item.
After Your New Countertops are Installed
You'll likely be getting new sinks along with your new countertops. For best results, it's generally recommended to wait 24 hours after countertop installation before setting up the sink.
There are pros and cons to each type of sink, The best thing about a top mount sink (or drop-in) is that it is much easier to install and replace.
While it can be done, changing a sink in a granite countertop puts the stone at risk of damage, which can be very pricey to repair. Fortunately, the process of removing a sink in a granite countertop is far less challenging than it seems – so long as you have the proper tools.
Plumbers typically charge an hourly rate ranging from $50 to $200 for kitchen sink installation. The duration of a sink replacement project is usually around 4 hours, which can add up to between $200 and $800 in labor costs.
Your sink's lifespan will depend a lot on its material. Stainless steel sinks last 15 to 30 years. Porcelain sinks last 25 to 30 years before they'll need to be refinished, after which they can last longer. Enamel steel sinks only last about 5 to 10 years if used frequently.
The standard sink size is about 22 inches long to 30 inches wide, but once again it's crucial to take proper measurements. If you're replacing a drop-in sink with rims, start measuring from the outer lip of the sink, not the basin itself. If you have an undermount sink, start measuring where the edge meets the counter.
Synthetic materials are typically less expensive than natural stone, with laminate and acrylic being the most cost-effective choices. "Soapstone and tile are also lower-cost options for countertop materials, but they come with some weaknesses like low durability and limited color options," says Carson.
Once your sink is fully installed, wait 24 hours for the caulk and putty to fully dry before turning on the water lines. With the water lines on, you can test your ability to run hot and cold water and drain the sink without leaks. Stopper the sink and fill it halfway, then let it full run down the drain.
So, let the Fantastic Handyman's plumbers take care of every aspect of the process. Whether you need to install a kitchen sink or replace the basin, we will safely and securely fit it, no matter the sink type and the additional plumbing adjustments required.
Depending on the material, you'll probably need to replace your pipes somewhere between 20 and 100 years after their initial installation. The longest-lasting materials are cast iron and copper, with a lifespan of 50 to 100 years, whereas galvanized steel and brass pipes can last up to 50 years.
Normal range: $216 - $642. The typical cost to install a sink is $216 to $642 , but varies depending on if you're replacing an existing one or installing a new sink. Installing a new sink can cost anywhere from $100 to $1,600 , depending on what type and style of sink you get and where it's located in your home.