Is it more cost-effective to leave your AC running? The short answer is yes, it's more cost-effective to keep your air conditioner on all day. However, don't take this as a green light to crank it up to the max 24/7! There's a smart way to go about it, which we'll delve into in a moment.
According to some sources, it is cheaper to adjust the temperature of your AC rather than turning it off completely when you're not home. This is because turning off your AC can cause your home to heat up more than it can store, and then your AC will have to work harder to cool it down when you turn it on again.
As it turns out, the most efficient way to keep your home cool and the bills low is to leave the AC running—ideally, with the temperature turned up toward the upper 70s.
According to the Department of Energy1, 78° Fahrenheit is the sweet spot for air conditioners to balance energy savings and comfort when people are at home and need cooling.
Although many people believe that it is more costly to turn your AC on and off vs. leaving it on, this is entirely false. People often base this belief on the idea that powering on your system requires a burst of energy, so leaving it running would minimize energy usage by reducing these bursts.
Best AC Temperature Settings While You Are Home
As you consider the most comfortable room temperature for your lifestyle and family, keep in mind that for each degree that you set your thermostat above 72 degrees, you can save up to 3% on your energy bill.
This is more of a personal question, as different people feel comfortable at different temperatures. Since 72 degrees is generally agreed upon to be an ideal indoor temperature, most people would probably still feel comfortable setting their AC units slightly higher than this, perhaps at around 75.
AC definitely consumes more power than a Fan or a cooler, and how many hours will run AC depends on that your electricity bill will shoot up.
Leaving your air conditioning unit running all day won't typically cause damage to the unit itself, but it can strain the system and result in costly energy bills. Running your air conditioner non-stop for extended periods without regular maintenance leads to wear and tear on the unit.
The average cost per kWh in the US is currently $0.11, according to the Energy Information Administration (EIA). This means an AC unit could cost you from $5.17 to $5.94 per day to run. Or about $155-$178 per month you're running it.
Eco or energy-saving mode
This is the ideal mode for users looking to save up on energy bills by toning down the performance of the AC and its compressor. Eco-mode uses less electricity by automatically adjusting the fan speed and temperature, while still maintaining a comfortable level of cooling.
A more moderate setting like 24°C (75.2°F) can achieve comfort with reduced electricity usage.
AUTO is significantly more energy efficient between the two modes since the fan is only running when your AC is going through its cooling cycle. This takes less power, which is more budget-friendly, with some estimates showing you can save as much as $50 per month just by keeping your AC on AUTO.
If the temperature is set to 74°F but the thermometer shows 78°F, you will have to recalibrate the thermostat to account for this 4-degree deviation. Even with older AC units or furnaces, you might have to recalibrate your thermostat from time to time.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
According to the U.S. Department of Energy, you'll want to keep your thermostat set to 78 degrees. It's considered the ideal “magic number,” the one that saves you the most money throughout the season.
So, is it better to leave your AC on all day? Well, it depends. After all, turning the AC on and off costs more initially. However, leaving your AC on all day consumes more energy and adds wear and tear to your system, which may cost you more money for repairs in the long run.
Increase the thermostat
If you are just as comfortable with your thermostat one or two degrees higher than you currently have it set, go ahead and turn it up. Even a one degree difference will have an impact on your energy bill. Many recommend 78 degrees as a good temperature for air conditioners to run efficiently.
What is sleep mode in AC and how to use it. Sleep mode is a low-power mode. The air conditioner will control the room's temperature in sleep mode and raise it by 0.5 to 1 degree Celsius in an hour, up to a maximum of 3 degree Celsius per hour. With this setting, the air conditioner will keep you cool and cozy all night ...
Since air conditioners use more energy when they cycle all day, it is cheaper to let your system operate at full capacity when you're home instead of running it at a lower capacity all day. The more energy you use, the more money you'll pay in monthly utility bills.
To get a general idea of your daily energy costs, multiply the wattage by the number of hours of energy consumption. For example, if the air conditioner consumes between 3,000 and 5,000 watts and runs for nine hours each day at a cost per kilowatt of $0.10, the daily cost ranges from $2.70 to $4.502.
Let us now calculate the AC power consumption using an example. For example, there is a branded 1.5 kW AC that runs 8 hours per day. As a result, the total power consumption of that air conditioner will be 1.5 * 8 * 30 =360 units per month.