Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).
In most scenarios, refinishing rather than replacing your hardwood floor is the ideal outcome. While refinishing hardwood can be a long and tedious process, it is much more cost-effective than a total replacement. During the refinishing process, all furniture will have to be removed from the room.
Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.
Expense. Price is usually the first thing people consider when it comes to refinishing or replacing a hardwood floor. The truth is, it is almost always cheaper to refinish your floor than to replace it.
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Installing hardwood flooring averages between $6 and $12 per square foot. Wood flooring costs $3 and $7 per square foot for materials and about $3 to $5 per square foot in labor to install.
Hardwood floors are one of the best flooring options for homeowners looking to increase the resale value of their home, with hardwood typically yielding around a 75% return on investment.
Your beloved hardwood floors' aesthetic can be easily upended by a rogue board with water damage, cracks, or grooves. But try not to fret—you can replace individual wood planks on your own without having to replace the entire floor.
It's commonly accepted that you refinish every seven to ten years. Important note: some hardwood is only 1/4 inches thick. In this case, a refinish could strip away all traces of the floor. Unsure about how thick your hardwood is?
For deep gouges or dents, you can use a wood floor filler and wood stain to repair the damaged area. Before applying the filler, tape off the damaged area so you don't accidentally apply filler where it doesn't belong. Mix equal parts of the epoxy-based filler and apply to the gouge with a putty knife. Allow to dry.
Takeaway: Your worn down pre-finished hardwood flooring can be refinished up to 5 times. You can change the color of the entire floor each time that it's completely refinished. Leave the bevel in the floor and DO NOT have the bevel filled. Pre-finished hardwoods show scratches more than site-finished hardwoods.
So is it possible to pull up hardwood floors and reinstall them? Yes, this is definitely possible. Since they are environment-friendly and extremely durable, hardwood floors are often reused when remodeling or building a home. They also offer better aesthetics and lower costs than buying new materials.
Expect to pay between $4,500 and $30,000 for 1,500 square feet of solid wood flooring. The species of wood you choose for your home can be a big determinant of the installation costs.
As CNN reported, hardwood floors can also increase home value by 3-5%. This makes them a very attractive prospect for anyone looking to sell their house in the near future. However, even if you don't plan on moving any time soon, hardwood floors may still be a good investment.
For an example, let's go with traditional but high-quality hardwood—let's say $10 per square foot. At that price, installing hardwood floors in a 2,000 square-foot-house costs a pretty penny of $20,000.
When calculating how much it costs to refloor a house with vinyl or linoleum, homeowners can expect to pay between $3 and $10 per square foot. Better quality products like luxury vinyl will be at the top of this price range.
To cover 1,000 square feet, you can expect to pay $6,000 to $20,000. For materials alone, you'll pay $2 to $15 per square foot.
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project ...
Refinishing Prefinished and Laminated Hardwood Floors
Whether you have traditional hardwoods, prefinished wood, or laminated wood, restoring without sanding is a practical solution. Though you can sand your traditional hardwoods, it's difficult or even impossible to sand prefinished or laminated wood floors.
For example if you have a painted finish on your wooden floor then stripping will likely be more effective, however if you want to remove a basic polyurethane finish and you need to do so during the colder months of the year then sanding will be more appropriate.