Generally, using a timer is more energy-efficient and cost-effective if you have a traditional boiler or furnace. However, the ideal choice depends on your specific system:
Set your room thermostat
Once it reaches the set temperature, it turns the heating off until the temperature drops again. You don't need to turn your room thermostat up when it is colder outside. Your home will heat up to your chosen temperature whatever the weather, but it may take a little longer on colder days.
Most of the time, the best solution for energy efficiency is to set your thermostat at one temperature and leave it there. The lower you set it, the less your heater will have to work. Even if you set it higher, though, it's better to set it and leave it.
It takes time for your home to warm up and cool down. If you're not sure how long it takes, try turning the heating on about 30 minutes before you need it. You should turn it off 30 minutes before you'll stop needing it.
It is generally cheaper to turn your heat down or off when you are away for long periods (like an 8-hour workday) rather than keeping it at a constant, high temperature. While heating back up takes more energy, the savings from the lower average temperature outweigh the cost of re-heating, saving up to 10% on energy bills.
In most homes, Heating and Cooling (HVAC) systems drive the highest energy costs, accounting for nearly 40% to 50% of your total electricity bill. Following these, the appliances that run up your bill the most include water heaters, refrigerators, and laundry machines.
Typically, a furnace should cycle 3 to 8 times per hour, running for about 10 to 15 minutes each time. If it's cycling more frequently (short cycling) or running for 20+ minutes straight regularly, something's not right.
Heating and cooling (HVAC) systems are the biggest energy consumers in a typical house, accounting for roughly 45−50% of your total electricity usage. Water heaters, refrigerators, and lighting round out the rest of the major draws.
For most customers, we recommend turning on your furnace when the weather is consistently below 18° Celsius, which usually happens to be around the end of September, or early October. Some homeowners try to put off turning on their furnace as long as they can to save money, which is okay if you're healthy adults.
How many hours should my heating be on a day? For most modern homes, Patrick Garner, Gas Safe Engineer at Heatable, tells us that having your heating on for 4-6 hours a day, "split between short boosts at the times you actually need warmth", is a good general rule.
Because they do not use standard grid electricity or conventional electric and gas furnaces, the Amish heat their homes using off-grid, self-reliant methods. The most common systems include wood- or coal-burning stoves, propane and kerosene heaters, and natural airflow home designs.
The cheapest temperature to keep your house in winter is 68°F (20∘C20 raised to the composed with power C𝟐𝟎∘𝐂) while you are home, and lowering it to 61°F–65°F when you are away or sleeping, according to the Department of Energy. Setting your thermostat back 7°–10°F for 8 hours can save up to 10% a year on heating costs.
The largest source of heat loss in a typical house is uncontrolled air leakage (drafts), accounting for up to 38% of lost heat. Warm air escapes through hidden cracks and gaps, while the following structural areas are the primary culprits for escaping warmth:
Inadequate or inconsistent insulation, like air leaks, can create hot and cold spots throughout your house. If you've ever seen any of your home's insulation, it's probably what resides in your attic or crawl space.
The most cost-effective way to heat a house generally combines a highly efficient air-source heat pump with localized insulation and air sealing to stop heat loss. While upfront costs are higher, heat pumps can deliver up to 300% efficiency, significantly lowering long-term utility bills.
The Top Energy-Draining Appliance: Space Heating & Cooling
This includes both forced-air systems, heat pumps, furnaces, baseboards, window A/C units, and fans. Because they run for long periods and often at high wattage, they dominate the consumption profile.
We asked our social media community when they usually start to turn on their heating. More than half (58%) people said they leave it as late as they can before they turn the heating on. And a third (33%) said they already had the heating on by mid-September.
The global temperature forecast from ECCC indicates that 2026 will likely be among the four hottest years on record, comparable to 2023 and 2025, and approaching 2024, the hottest year ever recorded.
Extreme heat is the leading weather-related killer, causing more fatalities each year globally and in the United States than all other extreme weather events—such as hurricanes, tornadoes, and floods—combined.
Yes. Leaving a TV plugged in uses electricity even when it is turned off. This continuous trickle of energy is known as "phantom load" or "vampire power".
Electric heating systems and tumble dryers tend to be the most expensive electrical items to run because they use large amounts of power over extended periods. Other high-cost appliances include electric ovens and immersion heaters. Using these efficiently and during off-peak hours can help reduce costs.
No, 68°F is not generally considered cold for a house in winter. In fact, experts at the U.S. Department of Energy recommend 68°F as the ideal, energy-efficient temperature for the winter months while you are awake.
A typical furnace runs for approximately 10 to 15 minutes per cycle, cycling three to eight times per hour. A short cycling system runs for less than five minutes, then quickly restarts, often cycling much more frequently. This pattern prevents efficient heating and creates massive strain on your equipment.
How to Stay Warm if Your Furnace Breaks