After you have invested in pavers, whether that be a patio, poolside deck, etc., it is important to seal your pavers in order to protect from the weathering UV rays. These rays, which are known to impact the skin negatively, also impact the surface of your pavers negatively.
Concrete is porous and will absorb stains if not sealed. Sealants can also protect paver color from fading.
Ultimately, you can expect to enjoy between three and five years of protection from a high-quality sealer. With that said, a big part of answering the question, “How long does paver sealer last?” will depend on environmental factors such as weather and foot traffic.
Sealing your pavers protects them from the elements
One of the benefits of sealing your pavers is protection. Actually, it's probably the main benefit. When you seal your pavers, you are protecting them from several things, such as the harsh environment that we have here in Florida.
Fall or spring is a great time of the year to seal pavers. Cooler weather allows the sealer to penetrate into the pavers unhindered. Pavers will have an adequate amount of protection for when it's time to seal again. Make sure to keep leaves and other debris off the pavers while they are drying to avoid blemishes.
Using a nap roller for sealer application will take several times longer than using a paver sealer sprayer and joint stabilization is difficult to achieve. Spraying is the preferred method of applying water based paver sealers as it allows enough sealer to get into the joints.
How Much Does It Cost to Clean and Reseal Pavers per Square Foot? In total, you should expect to pay around $2 per square foot to clean and seal pavers. The price may vary between $1 and $3 per square foot, depending on the sealant and method of cleaning.
Most contractors and manufacturers recommend sealing pavers for the many benefits. Both concrete and brick pavers are porous materials that can change quality and appearance when they absorb liquids.
Never Too Late to Seal Pavers
It's always best to seal soon after a new installation. But, our proven system of repairing, cleaning and sealing will also bring back the original luster to old, dirty and fading pavers. Sealing is the final step in a comprehensive process.
If the sealer is not cured correctly, water can cause white marks or stains on your pavers and can even be trapped beneath the layer of sealer. It is very important not to walk or drive on sealed pavers at least 24-48 hours after application. A protective sealer enhances the natural color and beauty of your pavers.
Enhanced aesthetic: The paver sealer enhances the curb appeal of your properties and provides perfect finish to the paved areas and at the same time stabilizes the joint sand by locking it in place. It protects the pavement against harmful UV rays and prevents fading.
Do my brick pavers need to be stripped? In some cases, it may be necessary to strip off any existing sealer before applying a new sealant, especially if the existing sealer was applied incorrectly. This is especially true if you are switching from one type of sealer to another.
Should Pavers Be Dry Before The Sealing Proccess? Yes, it is important to ensure that your pavers and your pool deck are dry before applying sealer. If they are wet, the sealer will not be able to adhere properly and could eventually peel off and cause damage to the pavers.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Our opinion is no! Pavers are durable and as natural and beautiful as most stones found in nature. Without being sealed they're low maintenance and and they will retain their natural colors for generations. Pavers can last more than a lifetime if maintained properly.
You pressure clean the pavers, re-sand the paver joints and then apply two coats of your favorite paver sealer and the job was complete.
One of the best paver sealers is the Siloxa-Tek 8500. It is a penetrating concrete sealer designed to treat a variety of applications with an emphasis on hydrophobicity and reduction of water uptake. It dries completely clear with a natural finish that will not change the look or appearance of the susbtrate.
Understandably, some will think this indicates the blocks are in some way faulty, sub-standard or iffy, but that's not necessarily the case. The cause for this visible difference in appearance is most commonly* a variation in the concrete used to make the blocks.
For best results the sand should be dry to its full depth before sealing. It is always recommended to test the sealer of choice in a small area first. Always read product label and directions carefully before beginning to use any sealer products.
If your pavers have been sealed, which is a service that we offer, it's a lot easier to maintain and it does slow down mold growth for the simple fact that when your pavers are unsealed, that moisture will sit in the joints and make mold grow. Mold likes damp, dark areas.