Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while. Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Use Dish Soap and Water
Ordinary household dish soap as a degreaser is extremely useful for cleaning up oily, grimy concrete stains while avoiding the use of harmful chemicals. Start with two gallons of warm water and a mere two teaspoons of dish soap in a standard bucket.
Sweep off or vacuum up any loose dirt, dust, and debris from the concrete surface. Using a garden hose, wet the concrete. Then, apply a mixture of trisodium phosphate and water, scrubbing the solution onto the surface using a stiff-bristled broom. You can also use a pressure washer for this step.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
Bronner's castile soap is our favorite non-specialized product for surface cleaning indoor concrete floors. Dr. Bronner's is a nearly pH-neutral cleaner that comes in a variety of natural scents. Because the soap is concentrated, a few drops in a gallon of water is plenty.
Scrub the concrete with a nylon-bristled brush and then rinse thoroughly with the garden hose. For extremely heavy stains, a power washer provides a much stronger stream of water to blast away the grime. Use a hose to rinse greenery after the patio is clean.
Cleaning concrete with vinegar will not damage it! However, saturating concrete for an extended period will damage the cement that binds concrete together. Over time, vinegar erodes the concrete itself, so be careful.
Mix a solution of one tablespoon dishwashing liquid and one-half gallon of warm water in a bucket. Use a wire or heavy-duty scrub brush dipped in the solution to scrub away any traces of the paint. If the paint has dried slightly, soak an old cloth with paint thinner.
Simple Green Oxy Solve Concrete and Driveway Cleaner can be used with a power washer or for manual cleaning of concrete surfaces including driveways, sidewalks, patios, and walkways.
Opt for the Most Basic Route: Soap and Water
Cleaning a concrete driveway does not have to be fancy. The easiest is the trusty soap and water mixture. Use dish soap and add it to a large bucket full of water. Then, get your stiff scrub brush, making sure it is not made of metal.
Choose a highly concentrated, oil busting dish soap, such as Dawn. Squirt it over the stain and spread it around to cover the entire affected area. Let it sit for about an hour, then mop up the dish soap and oil with a paper towel.
Handwashing small loads: Dawn® Platinum can help remove stubborn oil and food stains, making it an ideal option for handwashing small loads of laundry.
Recipe #3 – Mix 1/3 cup Tide to 1 gallon of warm water. Any of these should work well for cleaning unsealed cement garage floors. SCRUB THE FLOOR – Pour your warm water solution onto a section of the garage floor and start scrubbing. Begin at the back of the garage and move outward.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
It removes dirt, oil and grease from concrete, driveways, asphalt, part and equipment. Nor for use on sealant coats.
While mold may not find enough nourishment in concrete alone, it can feed on moisture, algae, bacteria, salts, dust, pollen, dirt, dead skin, and other particles trapped within it. As mold degrades concrete, the material becomes more porous, allowing for further moisture, bacterial and particulate intrusion.
Mix one cup of bleach to 1 gallon of water. It can then be sprayed onto the concrete and scrubbed. Most of the mold should be removed through this method. A less aggressive method is to mix 1 cup of vinegar with 2/3 cups of water in a spray bottle.
Penetrating sealers are a great choice if you want an all-in-one concrete sealer. This does the job of concrete sealers and coating by closing up the pores of the concrete. This way, your project can be protected from weather, stains, and mold at the same time.
The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals. Powdered peroxide-based formulas are generally high-performance alkaline, tile and grout cleaners and degreasers that are made for use on heavy-duty concrete.