Sealing your concrete not only ensures your concrete surface is protected, but that it is long lasting. It should also be noted that compared to the cost of replacing a concrete surface, sealing is relatively inexpensive and easy to do–definitely worth a long lasting concrete floor, patio, slab, or driveway.
Outdoor concrete sealers are not only worthwhile but necessary. Experts who recommend having a concrete surface sealed are doing their customers a big favor. Without this extra layer of protection, concrete will absorb moisture and may begin to crack, spall, flake, and discolor, among other things.
While the advantages outweigh the negatives, there are some disadvantages that you should keep in mind before sealing your concrete driveway. Sealant can make the surface slippery. Sealants tend to dry down with a glossy or semi-glossy sheen that can be quite slick, especially when wet.
Acrylic Concrete Sealers: Acrylic sealers last 1-3 years before they need to be re-coated. Epoxy Coatings: Epoxy coatings last 5-10 years before they need to be re-coated. Urethane Coatings: Urethane coatings last 5-10 years before they need to be re-coated.
Concrete performs quite adequately if it is never sealed at all, but applying a good quality sealer every few years will extend its life and keep it looking good. This is especially true if you have a stained or etched concrete driveway or patio.
The Drawbacks of Seal Coating
There are some drawbacks to sealcoating, however. One is that it can be messy and difficult to apply evenly. It's also important to note that sealants will not repair significant damage to your driveway; they will only protect it from further damage.
After discussing the factors you need to look for and the regional location of the project, in broad terms, Spring is in fact the best time of year to seal concrete. With its moderate temperatures and humidity levels, it tends to provide ideal conditions for the application and curing of sealers.
It's Never Too Late …
Sealing your garage floor might not be possible if you have moisture in your garage. This is typically the only scenario where we don't recommend sealing right away, mainly because you should deal with the cause of the moisture first. It could be due to a plumbing leak or a drainage issue.
A: Yes! Old concrete can be sealed for the first time or resealed if it has been previously sealed with a concrete sealer. Before sealing old concrete you want to make sure you determine if the concrete has been previously sealed.
A sealed concrete driveway can last much longer than an unsealed carport. Although a driveway that hasn't been sealed takes time to breakdown, its deterioration is inevitable. The primary reason concrete doesn't last as long without sealer is that it's a porous material.
Solvent base sealers tend to over darken concrete stain, looking as it does when saturated wet with water. Water base sealers such as Clear Shield, makes the concrete look as it does when damp with water, not saturated wet but not dry either.
An unsealed concrete floor is going to be more reactive and sensitive to changes in temperature. It will freeze in cold climates and expand in warm ones. This can cause crumbling, chipping, and cracking.
Concrete can be described as a hard sponge that soaks up oil and water-based spills. Easily marked by tires and outdoor elements, it is important to seal the surface, so it looks beautiful year-round. The other benefit to sealing concrete is improved cleaning and maintenance.
If you want to clean your concrete, there are a few things to keep in mind. You should use a pressure washer or other high-pressure water source to remove stains such as oil and grease. When using a pressure washer, be careful not to damage the sealer on your driveway by putting too much pressure on it.
In order to properly seal your concrete, then, you must clean the surface of the substrate before applying a concrete sealer of any variety. The easiest and most effective way to clean the concrete will vary depending on the condition of your concrete and whether it has been treated with chemical stains.
Sealing your concrete isn't really a labor-intensive, nor costly, job. By sealing your concrete every 2-5 years, as recommended by experts, you should keep your floor in good shape, preventing cracks, pitting, and additional damage.
Before you begin sealing, however, it is very important that you properly clean your concrete. Unless your concrete is brand new, it has inevitably accumulated dirt, oil, and other grime.
The answer depends on the surface's square footage. For large surfaces such as commercial floors, a sprayer is faster and way more efficient. Finally, for small surfaces, such as garages or any other exterior surface, a paint roller or any other type of roller will do the trick. Rolling is a less expensive process.
Sealing concrete is a necessity: It keeps your floors clean, glossy and stain-resistant. Regularly applying a protective coating is vital to preventing chips, cracks and dirt buildup.
Can Sealing Prevent Cracks on Concrete Surfaces? Concrete sealing can stop most types of concrete fractures. This fact is especially true if the crack is a result of poor-quality work in the concrete mix or site preparation. However, sealing can prevent future damage that may start from the top layer of the concrete.
Once applied, sealers create a chemical reaction and the outside temperature decides how fast that reaction occurs—or if it happens at all. Most manufacturers recommend 50 to 90 degrees as the ideal temperature range for applying concrete sealer.
There are many ways to clean concrete before applying a sealer but we recommend removing all dirt and debris, power-washing and using an industrial strength concrete cleaner before sealing with a concrete sealer. In order to clean the concrete, we first recommend power washing.