Yes, Bona is safe to use on vinyl flooring. However, it is crucial to use Bona Hard-Surface Floor Cleaner or Bona Pro Series Luxury Vinyl Floor Cleaner, rather than their hardwood-specific formulas.
Yes, you can use Bona on vinyl floors, but you must use the correct formula. Specifically, you should use the Bona Hard-Surface Floor Cleaner or the Bona Pro Series Luxury Vinyl Floor Cleaner. Do not use Bona Hardwood Floor Cleaner, as it is designed specifically for wood.
The best way to clean vinyl floors is using a pH-neutral floor cleaner (like Bona Hard-Surface Cleaner or Ecolab Concentrated Cleaner) paired with a damp microfiber mop. This approach removes dirt and spills without leaving behind a dulling, sticky residue.
Avoid using harsh chemicals, excessive water, or abrasive tools on vinyl plank flooring, as these can strip the protective wear layer, dull the shine, or cause planks to warp.
The best choice for Luxury Vinyl Plank (LVP) is Bona Pro Series Luxury Vinyl Floor Cleaner or the standard Bona Hard-Surface Floor Cleaner. Both formulas are pH-neutral, water-based, and specifically designed to clean vinyl without leaving behind dulling, streaky residues.
To keep luxury vinyl plank (LVP) flooring in top condition, avoid steam mops, high-heat cleaners, abrasive pads, bleach, ammonia, and oil-based cleaners. Do not use wax or varnish, and avoid using rubber-backed rugs, which can discolor the surface. Instead, use a damp mop with a pH-neutral cleaner.
This Bona floor cleaner is intended for cleaning LVT, LVP and WPC (wood plastic composite) floors, commercial and residential. Ph-neutral, leaves no oily residue and safe for use on luxury vinyl brands of flooring.
The best cleaners for vinyl plank (LVP) floors are neutral pH, non-wax, and non-oil-based formulas. They lift grime without stripping the protective wear layer or leaving a sticky, dirt-attracting residue.
Heavy or Sharp Objects Causing Gouges or Tears
One of the most significant risks to vinyl plank flooring care is the impact of heavy or sharp objects. High heels, dropped tools, or furniture legs, especially without protective pads, can easily gouge, scratch, or tear vinyl surfaces.
Yes, you can absolutely use Dawn dish soap on Luxury Vinyl Plank (LVP) flooring. Because it is a pH-neutral cleaner, it safely cuts through grease and dirt without damaging the protective wear layer. However, you only need a tiny amount, and you must rinse the floor afterward.
Professionals clean vinyl floors by vacuuming or dry-mopping to remove abrasive debris, followed by damp-mopping with a pH-neutral cleaner. They avoid harsh chemicals (like ammonia or bleach) and excessive water to prevent stripping the finish or causing planks to warp.
Yes, you can absolutely use a Swiffer on Luxury Vinyl Plank (LVP) flooring. It is one of the most practical tools for everyday maintenance. However, you must use the right tools and cleaning solutions to avoid dulling the finish or causing moisture damage to the seams.
Common Mistakes to Avoid When Cleaning Vinyl Plank Flooring
Avoid steel wool, abrasive scrubbers, or harsh chemicals like ammonia and bleach. These can scratch the surface or strip away the protective coating, leaving the flooring dull and damaged.
Unlike the Bona Hardwood Floor Mop, which Bona recommends for hardwoods only, the Swiffer WetJet is compatible with many surfaces including wood, ceramic tile, vinyl, and laminate.
Some versions recommend a pH-neutral floor cleaner, while others mention using a homemade cleaner of one cup of vinegar per gallon of water. If you're using a cleaning brush, a soft nylon bristle brush is recommended. Avoid common floor polishes, waxes, abrasive cleaners and soaps.
Clean hardwood, stone, tile and laminate floors with Bona!
To clean Luxury Vinyl Plank (LVP) flooring, start by sweeping or vacuuming dry debris. For wet cleaning, use a mild, pH-neutral cleaner (or just warm water) with a damp microfiber flat mop. Never use steam cleaners, bleach, or wax, as they will permanently damage the floor's finish.
Luxury Vinyl Plank (LVP) flooring typically lasts 15 to 30 years, depending on the quality of the planks, the thickness of the wear layer, and foot traffic.
Abrasive cleaners include products like scouring powders, rough scrub brushes, and steel wool. While these might work on tougher surfaces, they're far too harsh for LVP floors. Using abrasive materials can leave scratches on the surface that accumulate dirt, making your floors look worn and dull over time.
Avoid using harsh chemicals, excessive water, or abrasive tools on vinyl plank flooring, as these can strip the protective wear layer, dull the shine, or cause planks to warp.
White Vinegar + Warm Water
Add 1 cup of white vinegar to a gallon of warm water. This helps remove grime and restore light shine. Use it sparingly, too much vinegar over time can dull the finish. Rinse well after mopping.
We do a dry mop when we see dust or dog hair so at least twice a week. We do the wet treatment once a week. That is what we were told to do by the flooring installer. Vacuum and mop with a damp mop hot water and vinegar once a week.
Safe for all LVT, LVP, and WPC flooring. Ready to use - just spray and mop. Meets the U.S. EPA product standards and is Safer Choice Certified for containing ingredients that are safer for people, pets, and the planet.
Over time, foot traffic pushes soil deeper into the texture. And standard cleaning methods simply can't and don't reach. As a result, routine mopping may clean the surface high points while leaving soil behind in the grain and seams. The floor is being cleaned—but not effectively.
Bona Wood Cleaner Cloudy Film Issue: Causes and Fixes
Cloudy residue buildup and streaking after cleaning with Bona wood cleaner. A cloudy film from Bona wood cleaner often results from over-application or insufficient rinsing. Avoid saturating floors; use a damp mop rather than soaking.