What is this? To remove the mold on travertine tiles. Use 1- part baking soda to 4 parts borax and 8 parts water, mix in a spray bottle, spray onto your travertine tiles, then allow to work for 15 minutes.
Organic stains, such as those caused by coffee, juice, urine, and food, turn the travertine pink or brown. Remove these stains with a mixture of 12% hydrogen peroxide—food grade hydrogen peroxide—and a few drops of ammonia. Apply the product to the stone on a damp cloth.
What you'll need. Before choosing cleaning products for travertine floors, keep in mind that the stone generally does best with products that are pH neutral. Acids like vinegar, lemon, or other harsh chemicals like bleach can react badly with the stone and cause discoloration and permanent damage.
If you are deep cleaning travertine, then you can use a strong alkali cleaner, but you must remember to rinse the floor well to remove all traces of the cleaner. If you are undertaking regular maintenance clean, then use a ph Neutral cleaner, preferably containing a small amount of stone soap or linseed oil.
Avoid citrus or vinegar cleaning agents
Both these elements will cause the Travertine surface to dull. Acidic substances like lemon, orange peels, baking soda, vinegar slowly may penetrate the surface to cause irreparable damage.
To kill off mold and mildew and keep your investment looking its best, travertine can be cleaned with a peroxide-based product like Oxiclean, which will not harm the polish on your travertine. Remember, hydrogen peroxide can bleach fabric, so, like bleach, watch your clothes and linens.
Travertine can etch very easily when exposed to pet urine, even if it's cleaned up quickly.
Travertine will absorb harsh chemicals, which again will damage the stone. Do not use products like MR Clean, dish soap, Windex, or anything like these products. These products leave a residue on top of the travertine tiles, collecting and attracting dust and dirt.
Consider purchasing a floor cleaner formulated for travertine to use regularly. The label should clearly state if the cleanser is formulated specifically for travertine. Opt for a cleanser with a neutral pH of 7 or below. You can also use mild dish soap to clean travertine floors 3-4 times per year.
Baking soda, which is a bit abrasive in nature, can effectively loosen up the dirt particles without causing any damage to the tile surface or the indoor air quality.
Baking soda is efficient enough to clean the bathroom tiles on its own. Its ingredients are powerful enough to eradicate dirt and stains on the tiles. Apply baking soda on the tiles and leave it alone for a few minutes. After that, all you need to do is clean the tiles.
What leads to a degraded quality of travertine tile? Most often, the culprits would be scratches, spills, and cleaning products. Your best defense to retain a beautiful travertine floor is frequent dust mopping.
Simple Green Stone Cleaner is perfect for regular use on marble, granite, quartz, travertine, porcelain, limestone, ceramic, porcelain, Corian®, Silestone®, and other engineered stone.
Mopping: Dry 'mop' your travertine floors with a clean, dry dust mop to remove daily dirt, dust, and debris. Next, if needed, use a soft mop, with warm water to clean the travertine. If needed, you can also use a travertine specific floor cleaner.
Take special care to avoid contact with common acidic liquids such as vinegar, wine, fruit juices, coffee and tea – all of which can stain travertine permanently. If travertine comes into contact with any of these liquids, it should be cleaned immediately with a soft damp cloth and neutral soap.
Combine equal parts water and baking soda with just a splash of your regular cleaning agent. Mix until pasty and scrub into the travertine tile or paver you'd like to clean. Then, cover the surface area of the stain with a thick coating of the mix and allow it to sit for 15 to 30 minutes.
Travertine sealers enhance the natural colors in the stone. They can give a glossy look that makes the surface appear clean and new. A sealer prevents discoloration that can take away from the beauty of your travertine surfaces.
To kill off mold and mildew and keep your investment looking its best, travertine can be cleaned with a peroxide-based product like Oxiclean, which will not harm the polish on your travertine. Remember, hydrogen peroxide can bleach fabric, so, like bleach, watch your clothes and linens.
We've said it before (and we'll say it again) DO NOT use Murphy's Oil Soap on any natural stone surface. Following our 20 years experience and the Marble Institute of America's Maintenance Guidelines, we recommend a neutral PH rinseless stone soap, used with an unbleached clean nylon pad to clean stone.
Mixture # 2 – Baking soda, water, and castile soap. Not only did it make my grout clean, it “buffed” the travertine tile. Making it look and feel brand new and soft. Always make sure to spot test before using any products on your porous marble surfaces.
Certain products cannot be used on certain stones as they are too harsh or acidic and can cause etching on stones such as marble, travertine, and limestone. Products that should never be used on these types of stones include vinegar, Scrubbing Bubbles, Tilex, Comet, etc.
When baking soda is mixed with vinegar, something new is formed. The mixture quickly foams up with carbon dioxide gas. If enough vinegar is used, all of the baking soda can be made to react and disappear into the vinegar solution.
When vinegar (dilute acetic acid) and baking soda (sodium bicarbonate) mix together, the pair "foams up" to produce carbon dioxide gas, as well as liquid water, acetate ions and sodium ions. The carbon dioxide gas is what produces the bubbles.