Removing coffee and other tough stains– whether you have spilled coffee on the porcelain floor in the kitchen or have a grease stain on the bathroom wall, you can remove these stains with a solution of water, ½ cup baking soda and a few drops of Dawn® dish detergent.
Pour warm water into a bucket and mix ¼ cup of baking soda and ¼ cup of ammonia (While baking soda is slightly abrasive, it's mild and generally safe to use on porcelain.
Baking soda, which is a bit abrasive in nature, can effectively loosen up the dirt particles without causing any damage to the tile surface or the indoor air quality.
That's right: water alone is enough to clean lightly soiled porcelain and ceramic tile surfaces. No harsh chemicals are necessary! If you choose to use a mop for your flooring, be sure you have swept up debris beforehand and use a flat mop rather than a sponge mop to keep from pushing dirty water into the grout lines.
Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
Although porcelain tiles offer exceptional durability, there are few products and techniques you should avoid at all costs. Never use a product that contains harmful chemicals such as ammonia or bleach (or any type of acid-based cleanser). These type of chemicals can alter the colour of the tiles and/or the grout.
Never use oil-based detergents or wax cleaners. On unglazed porcelain, never use any cleaners that contain dye or coloring. Never use steel wool to clean porcelain tile—small particles of steel can become embedded in the tile and grout, eventually causing rust stains.
For most types of tile, including porcelain and ceramic, you only need one key ingredient: A DIY mixture of warm water and dish soap will do the trick. Follow these steps to clean tiles: Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
While vinegar is safe to use on laminate, vinyl, porcelain, and ceramic tile, it is best to use it sparingly since the acid in the vinegar can dissolve the finish on your floor. Therefore, when you are using it on tiled floors, you want to make sure you cut it with water or rinse it completely with water.
Especially ceramic and porcelain tile and grout! Blue dawn does not discolor grout joints and further is a great degreasing agent from everyday traffic. Use daily to weekly. The more traffic, the more cleaning.
Baking soda is a safe deodorizer, whitener, and household cleaner—and it's an effective natural grout cleaner. Because baking soda is also a mild abrasive, using it for cleaning grout lines gives you extra firepower without the risk of scratching your tile.
Baking soda has stain fighting properties. You can use it alone or with vinegar for tougher stains. To clean bathroom tiles, you can also use baking soda alone or in combination with other compounds. You can directly spread it on your bathroom tiles and leave it on overnight.
Let the product sit for 30 minutes. Then, go back in and scrub gently with water. (Our Test Kitchen loves the Scrub Mommy scrubber for all kinds of cleanup tasks.) You'll watch the dirt melt right off the tile and grout.
To clean your porcelain and ceramics, start with a gentle dish soap and water. Slavid advises taking off your rings and to avoid using harsh scrubbers like sponges or toothbrushes. Wash using just your hands and sudsy water.
Mix up 1 part lemon juice to 2 parts baking soda. Let sit and scrub off after about 20 minutes using a soft-bristle brush.
Regular, basic cleaning with warm water and mild soap is sufficient to keep floors looking good. You can also use gentle, everyday multipurpose spray cleaner to remove soap scum, hard water deposits, and mildew.
Mix Vinegar-Water Cleaning Solution
Mix 1/4 cup white vinegar with 1 gallon of warm water. If desired, you can add essential oils for scent.
Porcelain tiles or ceramic tiles can be polished using white vinegar and dish soap, plus a microfibre cloth. Wood tiles generally need to be waxed using specific floor wax.
For polished or glazed porcelain tile, wipe with hot water and scrub stains with a bristle brush. Wash with vinegar solution or a commercial tile cleaner diluted to half strength. Wash one more time with hot water to rinse off the cleaner, then dry with a clean towel.
To revive dull, faded tiles and give them a gorgeous shine, an ammonia-water mix is one of the best. This inexpensive and easy-to-use solution is powered by the natural cleaning properties of ammonia and will leave your tiles looking their best.
But you must use the Wax-free neutral detergent and mild detergent to keep tile shiny and clean. There is some floor cleaning solution such as Faberchimica, Lithofin, and others that you can use to give shine to the tile. The borax powder is as effective as baking soda but it uses mostly to restore the shine of tile.
While hydrogen peroxide is not normally used for cleaning surfaces, there is nothing in normal glazed porcelain that it would damage.
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3' x 3' area and start mopping.
White vinegar costs less than the common store-bought cleaners, but can still effectively disinfect any surface without leaving a chemical residue. Cleaning floor tiles with vinegar is safe, as long they are porcelain or ceramic.