The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length. Generally, sinks up to 30" will contain one large single bowl.
What is the standard size for a kitchen sink? The standard size for a kitchen sink can vary, but a typical size for a single-bowl sink is around 30 to 33 inches in width and 20 to 22 inches in depth. Double-bowl sinks can range from 30 to 48 inches in width, depending on the bowl size and configuration.
In general, the standard sink size is 22” x 30”. While single bowl sinks can have a width upto 36 inches, double bowl sinks can go upto 48 inches.
Common Bathroom Sink Sizes
Small: From 15 to 20 inches long and nine to 12 inches wide, with a depth between 5-3/4-in. and seven inches. Medium: From 20 to 30 inches long, 19 to 24 inches wide and about seven inches deep. Large: From 30 to 50 inches long, 19 to 24 inches wide and about five inches deep.
Standard-sized kitchen sinks measure 22 inches by 30 inches.
While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely.
As a small kitchen sink size, 22-inch sinks can be perfect for compact kitchens or as secondary sinks in larger kitchens. Small sinks are also great kitchen nook ideas. If you have limited counter space, these can be mounted under the counter or in a corner.
Standard Kitchen Sink Sizes to Know
On average, customers who purchase single-bowl sinks prefer 30-inch-long dimensions at most. Experts recommend at least 22 to 27-inches in length, which also works for small kitchens.
Most styles of sink work in small kitchens, as long as the sink is roughly between 22 and 24 inches. Anything more than 27 inches runs the risk of being too big and overpowering your kitchen, as well as taking up valuable counter space. As you have less space, a single bowl sink may be the better option.
If you frequently use large pans or baking trays, it might be worth getting a sink with an extra wide or extra deep bowl – or even a 1½ / double bowl. If you don't have a dishwasher in your kitchen, make sure you get a sink with a built-in drainer, so you have enough space to let items dry after you hand wash them.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Some sinks will be labeled 30" Kitchen sink, but the basin size is in fact 28". [This sink will fit!] While other sinks are named after their TRUE 30" basin size [This will NOT fit]. Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet.
You need a 36" cabinet. A 33" cabinet will only fit a 30" sink.
The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
Its used for draining off water from hot pots when there's dirty plates in the other, washing hands, rinsing off plates etc when washing up.. Storing washing up bottle and sponge lol the list goes on!
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
Single-bowl sinks are generally larger than double-bowl sinks, which can make them more convenient for tasks such as washing large pots and pans. They also offer more uninterrupted space for items such as a drying rack or cutting board. Single-bowl sinks are often less expensive than double-bowl sinks.
OVERHANG - The countertop extends over the edge of the sink on all sides by approximately 1/8" - 1/4". Use caution with this installation to be sure that accessories such as colanders or cutting boards will fit properly. REVEAL - The countertop edge sits approximately 1/8" - 1/4" back from the edgeof the sink rim.
Width of the sink is determined by how much space is available on either side of the sink. E.g., if the countertop is 22″ wide, you only have room for a 16″ sink. If the countertop is over 24″, you can install a sink that is wider (oval). Always leave 4″-6″ or more on either side.
Dawn 22" Undermount Stainless Steel Kitchen Sink
This little gem measures overall at a little less than 22" left to right. This allows this sink to very easily fit in a 24" sink base cabinet.
TIP: Standard cabinet sizes are in 3” increments. I.E.: 27”, 30”, 33”, 36”, etc. In general your sink should be at least 2-3” smaller than your cabinet size.
Standard sink base cabinets are 24″ deep (back to front), and most sinks are designed to fit that size. However, widths vary widely and sink widths vary accordingly.
Most Popular By Configuration. Single basin, apron/farmhouse, workstation, and double basin kitchen sinks are the most popular sink styles for the upcoming years.
A shallow bowl depth — say, less than 8 inches — is going to be the most comfortable bowl depth for those who are 5 feet, 4 inches or shorter, or who are very tall (6 feet, 2 inches or taller). A shallower bowl depth allows a shorter person to work in the sink without having to lean into it to wash items in the bottom.