PSI Pressure range for Different Surfaces
Different surfaces require different levels of PSI pressure. Generally, for most residential uses, an electric pressure washer (less than 2000 PSI) will suffice. Soft surfaces, such as decks and siding, usually require more cleaning power than harder surfaces such as driveways.
Light-duty pressure washers are rated at 2,000 PSI or less and are suitable for cleaning automobiles, motorcycles, boats, bicycles and all-purpose cleaning. Medium-duty pressure washers produce 2,000 to 3,000 PSI and can be used to remove grease and grim from concrete, sidewalks, decks and siding.
2,000 - 2,900 PSI: This is a moderate strength unit used heavier residential tasks. These units are commonly sold as either electric or gas pressure washers. 3,000 - 6,900 PSI: These high pressure models are what professional pressure washers and contractors usually use.
Although many electric pressure washers produce a pressure of about 1900 psi, you should only use a water pressure of 1500 psi or lower on your car. You'll need to look for a low-pressure machine that's a bit less aggressive than the standard.
Too much pressure (generally anything more than 1,900 PSI) can damage the paint job on your vehicle. If you're determined to do so, keep the following tips in mind. In addition to using the right pressure (1,000 to 1,200 PSI), make sure you use the correct nozzle.
Choosing a Pressure Washer
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi). Determine whether you will rent or buy your machine.
Medium Duty 2000-2800 PSI
They're great for cleaning concrete, brick, and wood. They work especially well for cleaning patios, sidings, roofs, decks, and fences.
If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
To clean a deck, some homeowners choose a washer with a pressure range of 1,300 to 2,400 psi, the same as washing a car. HGTV recommends working with the lowest pressure that cleans your deck materials gently: about 500 to 600 psi for soft woods like cedar or pine, and up to 1200 to 1500 psi for pressure-treated wood.
For starters, too much pressure on windows can easily cause the glass to shatter, so you should never use a PSI over 2,000. Furthermore, you need to adjust the spray to its widest angle on a 40- or 65-degree nozzle and use a spray pattern that avoids perpendicular pressure on windows.
A pressure washer turns the flow from a regular garden hose into a powerful spray. Whether prepping for a fresh coat of paint or simply washing away built-up dirt and grime, learning how to use a pressure washer can be a skill to tackle various surfaces and projects around your home's exterior.
Not too much but enough to expect good quality. 2000 PSI and 1.2 GPM is powerful enough to handle smaller jobs around the house and car washing. This is not enough power for larger projects.
Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.
“Most standard pressure washers will use between 2 to 4 GPM.” That comes a total of 120 to 240 Gallons Per Hour. To bring that into perspective, a standard bathtub holds about 80 gallons of water. If you were to clean your house for 1 hour straight, you'd be using the equivalent of about 2 to 3 baths.
A medium-duty pressure washer is strong enough to blast greasy, grimy stains from residential areas. Homeowners can safely clean sidewalks, concrete driveways, decking, and siding with a 2,000 to 3,000 PSI washer.
There's no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it'll take longer. If you have a large driveway with lots of stains, you'll want more power to do the job faster. I chose the 3,100-psi gas pressure washer and cut the job time in half.
Domestic vs Industrial or Professional Pressure Cleaner
If your pressure cleaner only goes up to 1500 psi at maximum, you can still clean your driveway. However, take note that it may take a little longer and more effort, and there may be some dirt and stains it will not get out.
The bare minimum is usually between 2,000 and 3,000 psi for fill and simple surfaces (e.g., patios or sidewalks). ACI sets 2,500 psi as the structural concrete minimum. Pavement, slabs, and footings can be up to 4,000 psi. Suspended slabs, beams, and girders (typically found in bridges) might be 5,000 psi.
To correctly strip old paint, you should work with a power washer with a psi of 2000 or higher. Even starting out at 2000 probably won't do the trick and you'll need to set the psi closer to 3,000 for effective paint stripping.
HEAVY-DUTY pressure washers in the 2,100 PSI and above range deliver extra cleaning power and are great for large jobs such as long driveways, farm equipment, and paint stripping. Pressure washers in this PSI range are typically gas powered units.
Pressure washing using 500 to 1000 PSI is recommended for cleaning masonry. Many professionals use 100 to 1500 PSI to avoid damage. 2,000 PSI is the absolute maximum, and that's for experienced pressure washers only.
If the pressure is set too high, it may ultimately damage your vinyl fence. It's best to start at a lower setting and adjust accordingly to your personal need. Usually, 500-800 PSI is an acceptable range to start with.