Apply heat to the section of pipe using an electric heating pad wrapped around the pipe, an electric hair dryer, a portable space heater (kept away from flammable materials), or by wrapping pipes with towels soaked in hot water.
The job goes more quickly by pouring hot water or a mixture of vinegar, baking soda and salt water down the drain. Space heaters, hair dryers and heating pads are highly efficient tools for unfreezing a drain pipe. If a frozen drain line ruptures, turn off your home's main water supply.
Apply heat to the frozen area
There are several ways to do this. You can wrap the pipes in thermostatically controlled heat tape, or you can use an external heat source such as a hair dryer or space heater.
Pipes typically burst when exposed to extremely low temperatures for an extended period of time (anywhere from 1-3 days depending on temperature). This is especially true for pipes located on exterior walls. A frozen pipe is likely to burst when any water or liquid trapped within it freezes and begins to expand.
Keep the faucet open. As you treat the frozen pipe and the frozen area begins to melt, water will begin to flow through the frozen area. Running water through the pipe will help melt ice in the pipe.
Frozen pipes will eventually thaw on their own, but it could take days or even weeks. If New York City is experiencing a brutal cold snap, the temperature could stay below freezing for many days. Meanwhile, the water in the pipes could be expanding.
Turn the Heat Upin the Property: You can attempt to thaw the frozen pipe by increasing the temperature in the property. Turning the thermostat up may be all that is needed to allow the ice blockage to melt.
If your pipes have been frozen for more than two days, shut down your home's water supply. Locate the frozen length using touch, sight and sound. Make sure the pipe hasn't burst, and open indoor faucets. Unfreeze the pipe using a hair dryer, heat tape, space heater or heating pad.
Prevent Frozen Pipes
Moving water keeps pipes from freezing. Find shut off valves for emergencies. Insulate pipes in unheated areas. Open cupboards and vanities to warm pipes.
Surprisingly, it's actually the thawing process that can cause a pipe to burst. This can happen when pressure continues to build as the newly thawed liquid begins to flow and forcefully pushes against the still-frozen areas within the pipe.
Things You Should Know
Warm the pipe with a blow dryer and wrap electrical pipe tape around it to thaw a pipe. Insulate your home and keep the heat on so that it stays at least 55 °F (13 °C) during winter to keep pipes from freezing.
Tip #9: Hot Water and Salt Can Thaw Drainpipes
While we didn't have any issue with our drainpipes, our plumber also gave us this bit of advice: If your drainpipes freeze, boil a kettle of hot water. Stir a cup of kosher salt into the hot water, then pour the concoction down the frozen drain.
Never pour hot water on frozen plumbing or try to thaw pipes with a blowtorch. The hot water usually freezes on the outside of the pipe, and the torch can cause frozen pipes to explode if steam is produced. Also, do not strike pipes in an attempt to break up the ice, as hammer blows can cause pipes to crack.
Pipes: Turn off water supply to the house and drain pipes to protect them from freezing. You can empty pipes by running the water and flushing the toilets after the water has been turned off. After draining the pipes, it is a good idea to leave the faucets open to prevent pressure build up from any water that remains.
We repeat: keep your faucets open and your water turned off while pipes thaw! Keeping the faucets open will also expedite the thawing process and allow the thawing ice to run through the pipes.
Manually thaw: Begin the thawing process at the most vulnerable places (near faucets). By targeting these areas first, your pipes will be less likely to burst. To do so, gently apply heat to the frozen areas. A blow dryer is a good option (use caution, go slowly, and don't use an open flame).
If the pipe is behind a wall, you can turn up the thermostat and wait for the thaw. Or you can hook up a lamp to warm the area. Infrared lights work best because they don't warm the air, just the pipes behind the wall. If the pipe is exposed, you can heat it with a hairdryer.
Frozen pipes can cut off your home's water supply and cause damaging leaks. In many cases, the help of a plumber is needed to resolve the problem. To prevent further damage, it is generally recommended that you turn off your main water supply valve and your water heater until repairs have been made.
Be prepared to wait at least 30 to 60 minutes. When the pipe begins to thaw, water will start flowing at a faster rate through the open faucet. Even after the water pressure is fully restored, it's recommended to keep the heat on the pipe to ensure the ice in the line is completely melted.
Simply pour a handful of salt down your drain pipe, quickly followed by boiling water. Alternatively, boil the water in a saucepan and stir the salt in the boiling water. Once the salt has completely dispersed, carefully pour it down the drain.
Although common, frozen pipes do not always burst. However, the ice can increase this risk when it thaws and is usually worsened as it raises pressure further which makes pipe bursting common near winter's end or springtime. Furthermore, the more water flowing through the pipe, the greater chance of rupture.
Yes, pipes can freeze overnight if temperatures plummet drastically. Uninsulated pipes in unheated areas like attics or exterior walls are most vulnerable.