How to run AC cost effectively?

Author: Prof. Myah Hammes  |  Last update: Friday, May 22, 2026

Here are some ways you can save money on your air conditioning and thus your electric bill.
  1. Throw some shade around the house. ...
  2. Cover your windows. ...
  3. Get smart about your thermostat. ...
  4. Install ceiling fans. ...
  5. Service your AC. ...
  6. Go with a state-of-the art cooling system. ...
  7. Seal the leaks. ...
  8. Avoid using the stove and oven.

What is the cheapest way to run your AC?

Increase the thermostat

If you are just as comfortable with your thermostat one or two degrees higher than you currently have it set, go ahead and turn it up. Even a one degree difference will have an impact on your energy bill. Many recommend 78 degrees as a good temperature for air conditioners to run efficiently.

What is the most economical way to run the air conditioner?

Use economy mode

Running your aircon in economy mode will make your compressor run slower, which means the unit will consume less energy. This feature comes in handy if you are using your aircon for long periods of time. So if you use the system all day and night, simply activate the economy mode.

What's the most efficient way to run AC?

7 Tips To Use Air Conditioning Efficiently and lower you energy...
  • Change the Air Filter Every 6 Months.
  • Use Smart Thermostat or AC Controllers.
  • Keep Your Doors and Windows Closed.
  • Set The Right Temperature.
  • Use Right-Size AC For Room Size.
  • Turn off the AC when you're not home.
  • Using sleep mode at night.

What should I keep my AC on to lower my bill?

Set the thermostat as high as comfortably possible during hot weather. The less difference between the indoor and outdoor temperatures, the lower your cooling bill will be. Keep your house warmer when you aren't home during the day, but cooler when you come home at night.

How to Run Your Air Conditioner in Summer and Winter | 2024 Update

What is the best temperature for AC on a low bill?

According to the Department of Energy1, 78° Fahrenheit is the sweet spot for air conditioners to balance energy savings and comfort when people are at home and need cooling.

How should I set my AC to save money?

Set your thermostat to the highest temperature that you can while still being comfortable in your home. Ideally, this should be around 78 degrees for summer air conditioning cost savings. Balancing your thermostat with your AC use helps to create more consistent temperatures throughout your home.

Is 72 a good temperature for air conditioning?

This is more of a personal question, as different people feel comfortable at different temperatures. Since 72 degrees is generally agreed upon to be an ideal indoor temperature, most people would probably still feel comfortable setting their AC units slightly higher than this, perhaps at around 75.

Is it cheaper to run AC all day or turn it off?

The short answer is yes, it's more cost-effective to keep your air conditioner on all day. However, don't take this as a green light to crank it up to the max 24/7! There's a smart way to go about it, which we'll delve into in a moment. So, why is it cheaper to leave your AC on?

Which mode is best for AC to save electricity?

Eco or energy-saving mode

This is the ideal mode for users looking to save up on energy bills by toning down the performance of the AC and its compressor. Eco-mode uses less electricity by automatically adjusting the fan speed and temperature, while still maintaining a comfortable level of cooling.

How can I make my AC cost less?

10 Ways To Reduce Your Air Conditioning Costs This Summer
  1. Running ceiling fans. ...
  2. Plant big shade trees around your house. ...
  3. Install a smart thermostat. ...
  4. Thermostat placement. ...
  5. Think about your basement. ...
  6. Seal off any leaks. ...
  7. Evaluate your home's insulation. ...
  8. Regularly service your AC.

What AC setting saves the most money?

What's the Best Summer AC Temperature? According to the U.S. Department of Energy, you'll want to keep your thermostat set to 78 degrees. It's considered the ideal “magic number,” the one that saves you the most money throughout the season.

How to tell if your AC is running efficiently?

Check What Temperature the Supply Register Is At

Ideally, your supply register should be at the least 15 degrees cooler than the air outside your home. This is a sign that your AC is running efficiently. To check this: Switch on your air conditioner and leave it running for 15-20 minutes.

How to minimize AC bill?

Tips to reduce AC bills
  1. Switch off when not in use. This is common sense, if practised properly will cut down AC bills. ...
  2. Set the temperature to the ideal level. ...
  3. Sealing the windows. ...
  4. Operate the AC and fan together. ...
  5. Regular service.

What is the lowest you should set your AC to?

In short, the 20-degree rule of air conditioning states that you should always keep your AC unit at no more than 20 degrees lower than the outside temperature. It means that, if the outdoor conditions are at 95 degrees, you should set your thermostat at no less than 75 degrees.

Is it better to leave AC on auto or off?

AUTO is significantly more energy efficient between the two modes since the fan is only running when your AC is going through its cooling cycle. This takes less power, which is more budget-friendly, with some estimates showing you can save as much as $50 per month just by keeping your AC on AUTO.

Does keeping the AC at 72 save money?

Best AC Temperature Settings While You Are Home

As you consider the most comfortable room temperature for your lifestyle and family, keep in mind that for each degree that you set your thermostat above 72 degrees, you can save up to 3% on your energy bill.

Which temperature is best for AC to save electricity?

In general, it's recommended to keep your thermostat between 24°C (75°F) and 26°C (78°F) for a good balance between comfort and energy efficiency.

Does switching AC on and off cost more?

Although many people believe that it is more costly to turn your AC on and off vs. leaving it on, this is entirely false. People often base this belief on the idea that powering on your system requires a burst of energy, so leaving it running would minimize energy usage by reducing these bursts.

How cool should my house be if it's 100 outside?

For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.

Is 78 too hot for a house?

Quick answer: The ideal house temperature is room temperature, which ranges from 68 to 78 degrees F, though this may vary from season to season. In winter, the average room temperature is generally 62 to 68 degrees, whereas in the summer, the average temperature is 72 to 78 degrees.

What should I set my AC to in summer?

What is the Best Thermostat Setting for Summer Air Conditioner Use? Energy Star recommends the following thermostat temperatures for your air conditioner in the summer: 78°F during the day if people are home. 82°F at night if people are home.

What is the most cost effective way to run AC?

10 Ways to Keep Your House Cool and Lower AC Costs
  1. Bump up the temperature. ...
  2. Install a smart thermostat. ...
  3. Put your thermostat in the right place. ...
  4. Limit heat-producing appliances during the day. ...
  5. Adjust the temperature at night. ...
  6. Keep windows sealed. ...
  7. Take advantage of shade. ...
  8. Insulate your home against air leaks.

Is 75 a good temperature for AC to save money?

One great way to lower energy costs is to avoid cooling an empty house. This is especially true during the middle of the day. If everyone in your household is either at work or school, then turning the temperature to 78-80 degrees will save you a chunk of change when the energy bill arrives.

Which AC mode to use in summer?

Cool mode: Ideal for hot days, this mode reduces the room temperature to your desired setting. Dry mode: Perfect for humid conditions, this mode removes excess moisture from the air without significantly reducing the temperature.

Previous article
How to remove yellow stains from tiles and toilets?
Next article
Why shouldn't you use fabric conditioner?