Put straight bleach in a spray bottle, heavily spray the entire floor. Let it sit for as long as needed To turn the ground white (I am assuming the grout was white). Rinse thoroughly. You could probably use half water and half bleach to begin with to see if that does the job.
High levels of copper in the water, or highly acidic water running through copper piping, will create that blue color. I think that now that you have the softener going and had the water tested, you'll be fine.
To remove blue stains from tile, we recommend applying a heavy-duty cleaner specifically designed to remove cleanly without damaging your surrounding tile, such as MAPEI's UltraCare Acidic Tile & Grout Cleaner. Mix with equal parts water and apply the solution to the affected area. Allow it to stand for 5-10 minutes.
To remove the dye, you will want to use Grout Shield's Grout & Tile Deep Cleaner, which cleans and lifts deep and hard-to-clean stains out of the grout's pores. To use this cleaner, mix 1 ounce of the cleaner with 8 ounces of warm water. Then, brush the cleaner into the grout with a brush applicator.
Comments Section Try using a magic eraser. I've used them before and it worked for me. A haze is pretty normal. You just have to keep cleaning it, then seal it. Microfiber cloth and magic eraser, saw it was recommended by the grout company, so I trusted it. Worked like a charm.
The resulting haze cannot be removed with water alone. Grout haze remover is a specialty commercial cleaner that helps to get rid of grout haze—especially in substantial or difficult cases. Grout haze remover comes in different formulas both cement-based and non-cement-based grouts.
Mr. Clean's best way to clean grout is with the Mr. Clean Magic Eraser Bath with Gain Original Scent. Bursting with the fresh scent of Febreze® Meadows & Rain, it's powerful enough to knock out even the most-stubborn buildup on grout throughout your bathroom.
Is hydrogen peroxide safe for grout? Yes, hydrogen peroxide is a natural neutral cleaner that is safe to use on grout. Hydrogen peroxide and baking soda produce oxygenated bleach, which is highly effective for cleaning grout.
Nail Polish Remover
It's time to turn to another beauty item you'll likely have on-hand: nail polish remover. An acetone-based nail polish remover is a great option for removing hair dye stains from your shower, tub and counters. Use a cotton ball to apply the nail polish remover to the stained area, then wipe it away.
Highly caustic or acidic cleaners like vinegar will stain and slowly corrode grout and tile finishes. Additionally, chlorine bleach will leach color out of tinted grout.
Additionally, a paste made from baking soda and water can be effective for natural fabrics like cotton or linen. Apply the paste to the stain, let it sit for a few minutes, and then rinse thoroughly. When used correctly, these techniques can significantly reduce or eliminate blue dye stains from your clothes.
If you prefer cleaning grout with a DIY mixture, make a paste of 3/4-cup baking soda, 1/4-cup hydrogen peroxide and 1 tablespoon of mild dish soap. Apply the paste to the grout with a grout brush and scrub the grout.
There are a few methods for removing blue-green stains with everyday household items. White vinegar is an effective cleaning solution, especially when combined with an abrasive material like table salt.
Long-lasting: An initial stain will last up to 15 years, depending on wear and tear.
Windex can also be used to clean tiles and grout, without causing any damage.
Using highly acidic cleaners on grout will cause discoloration, especially if it's porous, like cement grout. If the baking soda is applied repeatedly onto a sealed grout surface, it will remove the sealant and penetrate deep into the grout, staining it.
Cleaning the bluish-greenish stains caused by corroding pipes is easy. Just mix vinegar and baking soda into a paste, apply to the stains and wait about 10 minutes before wiping off. To prevent these stains, you'll want to have your water tested to see what is making your water so corrosive.
Vinegar is great for cleaning the bathroom in general (besides the smell), but adding baking soda can activate the dye to start breaking down making it easier to wipe away. Use a clean cloth to rub the paste gently on the stain and then rinse with warm water.
Professionals often use steam to loosen the dirt and other particles trapped in the grout without needing to scrub manually. While every steam cleaning machine is different, you'll follow this basic process to clean grout lines: Use a steam cleaner with a small nylon brush attachment.
Whether you're someone who regularly cleans the bathroom or saves deep cleaning tile grout for spring cleaning, OxiClean™ bathroom cleaners can help remove grout stains on vertical and floor tiles, plus more.
It works on the tile and the grout, effectively cleaning everything from hard water stains to mold and mildew stains to soap scum.
Yep, you read it right – toothpaste can help you clean the grouts spotless, and it is the perfect pick for those looking for something simpler yet effective. Try using just plain old toothpaste and apply a dollop to a damp cloth. Next, pat down the grout gently and let it sit like that for a few hours.
Grout pens are designed to cover old grout and fill in gaps between tiles, meaning they are an easy and effective way of refreshing bathroom or kitchen tiles.