Making cables look neat requires just a few basic tools and a bit of planning. Unplug and untangle your cords, then gather them into a VELCRO® Brand Cable Ties bundle. Hide power strips in BlueLounge® CableBoxes or run individual wires out of sight using Command Cord Clips.
Top Tips for Desk Cable, Wire, and Cord Organization
Route cords: Route the cords along the back of the furniture, securing them with clips or zip ties. Use cable ties: Bundle excess cord length with cable ties to avoid tangling. Push furniture back: Carefully push the furniture back against the wall to keep any cords hidden behind it.
Hide unsightly cords using cable management boxes, adhesive raceways, or by camouflaging them with furniture and decor. Common solutions include painting cord covers to match walls, using zip ties for bundling, or concealing power strips inside baskets and decorative boxes.
Hiding cables comes down to three main approaches: concealing them behind drywall, covering them on the surface, or masking them with clever decor. The fastest, most renter-friendly method is using adhesive cord covers that stick to the wall and can be painted to match your decor.
For exposed electrical wires, safety is the first priority. Ensure power is turned off before touching anything. The right covering depends on the situation:
use cable concealers
Unless done as part of a renovation project, this can get pricey as you'll likely need to call in pros. The next best solution is to hide the wire behind some wire trunking or a cable concealer. But don't stop there. Paint the concealer to match the wall to make it even less visible.
Utilize Small Clear Clips on the Backs of Furniture
One of the best things about these clips is that they're inconspicuous and stick to almost any surface, from painted walls and tile material to metal and glass. And these clips can be used to hide cords on walls, TV console legs, under the console, and more.
Organizing cables requires a simple three-step process: purge, bundle, and route. Unplug everything to start fresh, group cables by function, and secure the bundles with adjustable ties. Finally, tuck away excess slack and hide wires along the edges of your furniture.
To make wires look neat, start by bundling and securing them with reusable Velcro ties, routing them flush along furniture legs using adhesive clips, and hiding excess slack and power strips in a dedicated Cable Management Box.
You can conceal power cords with a length of flex tubing and a few cable ties. Bundle the cords with the cable ties and snip off the ends as needed. Measure the length of the cords you want to conceal. Measure and cut the flex tubing to match the length.
The biggest challenge with a desk in the middle of a room is that cords have no wall to hide behind. To fix this, mount a power strip underneath your desk so all devices plug in locally. Then, gather the remaining slack into an Under Desk Cable Tray and bundle the loose cords descending to the floor into a single, clean sleeve.
Sometimes I'll use fabric cord covers; I have a variety in different colors and they are decorative and disguise cords all at the same time. Buy them here, or they're a snap to make if you can sew (Our posts contain affiliate links.
Cable management ideas
If cables need to be hidden horizontally, the recommended solution is to run them behind a suitable skirting board designed for this purpose or to cut a shallow groove in the wall, place the cables inside, fill the surface with filler, and then install the panels on the prepared wall.
Hiding cables comes down to three main approaches: concealing them behind drywall, covering them on the surface, or masking them with clever decor. The fastest, most renter-friendly method is using adhesive cord covers that stick to the wall and can be painted to match your decor.
Yes, a house can be entirely rewired without removing or tearing down drywall. Electricians use minimally invasive "fishing" techniques to route cables behind walls, utilizing existing fixtures, attics, and crawl spaces, or by making only a few small, easily patchable holes.
Hide wires instantly by routing them behind walls with a DIY concealer kit, running paintable adhesive channels along baseboards, or using cord clips to tuck them behind furniture legs. For desk and floor clutter, corral power strips in decorative boxes and slip cables into desk drawers.
It is against the National Electrical Code to connect extension cord wiring through a hole or opening in a wall, inside a dropped ceiling or under flooring. The National Electrical Code® NEC® states: NEC ARTICLE 400 Flexible Cords and Cables General 400.1 Scope.
Hiding cables inside your wall provides a clean, professional finish and is a highly achievable DIY project. For wall-mounted TVs, the safest and easiest method is using an in-wall cord and power management kit, which eliminates dangling wires and bypasses complex electrical work.
To hide wires quickly and neatly, use a cable raceway kit to conceal cords against the wall, an in-wall concealer for a completely seamless look, or adhesive cable clips along the backs of your furniture.