Hiding electrical wires on your wall can be a quick, damage-free cosmetic fix or a more permanent construction project. The most popular DIY methods include using adhesive surface-mounted cord channels, fishing wires directly through your drywall, or swapping out thick cords for flat ones.
Utilize Small Clear Clips on the Backs of Furniture
One of the best things about these clips is that they're inconspicuous and stick to almost any surface, from painted walls and tile material to metal and glass. And these clips can be used to hide cords on walls, TV console legs, under the console, and more.
To safely and neatly cover electrical cords, use materials tailored to where the wires are located. Common options include cable raceways for walls, rubber floor covers for walkways, and split-loom tubing for organizing loose wire bundles.
You can conceal power cords with a length of flex tubing and a few cable ties. Bundle the cords with the cable ties and snip off the ends as needed. Measure the length of the cords you want to conceal. Measure and cut the flex tubing to match the length.
To hide and organize wires, you can buy surface-mount cable raceways for the wall, an in-wall concealer kit for a clean mounted TV look, or cable sleeves and boxes for desk and floor management.
Smart ways to hide wiring neatly at home
An in-wall wire concealment kit is an easy, DIY solution to hide TV and entertainment center cables inside drywall without needing an electrician. Most kits cost between $20 and $85 and allow you to safely route low-voltage AV cables (like HDMI) and power cords out of sight in about 30 minutes.
Yes, a house can be entirely rewired without removing or tearing down drywall. Electricians use minimally invasive "fishing" techniques to route cables behind walls, utilizing existing fixtures, attics, and crawl spaces, or by making only a few small, easily patchable holes.
Tangled cables and wires dangling from the TV can ruin the look of the room. Hiding power cords, cables and wires creates an uncluttered appearance. One cable management method is to attach molded plastic cable raceways to the walls and baseboard. Another is to conceal the cords and cables within the walls.
The easiest, damage-free way to hide open wires is to use adhesive-backed cable raceways (cord channels). Simply stick the track to the wall, tuck the cords inside, snap the cover on, and paint the track to match your wall color.
To hide cords on a wall without drilling, use self-adhesive cord covers (raceways) or flexible cable sleeves. These flat, paintable plastic channels stick directly to your drywall, keeping cables completely out of sight and matching your wall's decor for a seamless, damage-free look.
If cables need to be hidden horizontally, the recommended solution is to run them behind a suitable skirting board designed for this purpose or to cut a shallow groove in the wall, place the cables inside, fill the surface with filler, and then install the panels on the prepared wall.
Yes, coaxial TV cables do carry electricity, but it is a minuscule amount. The signal travelling through the wire is a low-voltage alternating current.
"You can also use cable management boxes to hide the wires and keep them organized." "I painted some cord covers to match my wall color and it blends in perfectly." "Running wires along the baseboards or behind furniture is another simple solution."
It is against the National Electrical Code to connect extension cord wiring through a hole or opening in a wall, inside a dropped ceiling or under flooring. The National Electrical Code® NEC® states: NEC ARTICLE 400 Flexible Cords and Cables General 400.1 Scope.
In-wall wire concealment involves routing audio, video, and power cables through the wall cavity rather than leaving them exposed on the surface. This creates a seamless, clutter-free look for wall-mounted TVs and entertainment setups using various specialized kits and tools.
Hiding cables comes down to three main approaches: concealing them behind drywall, covering them on the surface, or masking them with clever decor. The fastest, most renter-friendly method is using adhesive cord covers that stick to the wall and can be painted to match your decor.
Keep unprotected cords out of the path of foot traffic and furniture to prevent fraying, overheating, and tripping. 2. Never run a cord under a rug. It prevents the cord from releasing its heat and could lead to a fire.
If you decide to wall-mount your TV, then hanging wires are going to be obvious from the get-go. One way to hide them is with a cable cable raceway. A cord or cable raceway is basically a flat PVC tube that attaches to the wall and is able to be both cut to length and painted to match your interior.
The cost to hide TV wires in the wall ranges from $50 to $700+, depending on whether you DIY or hire a pro. The price largely depends on whether you just need to drop low-voltage cables (like HDMI) or if you need a new power outlet installed behind the TV.
Very easy to install, clean look
Easy to install using a level for vertical alignment. A good solution for electrical cord management.