Make sure the dishwasher is in Standby mode (no cycle running). Press the "Heated Dry," and "Normal," buttons one after the other, twice. After entering the correct button sequence, the control panel should light up as the dishwasher begins the reset.
Hold the start/reset button – If unplugging the dishwasher didn't work, the next thing you can try is pressing and holding the start or reset button for at least one full minute. All you have to do now is cross your fingers and hope it works.
Some models require you to shut off the power to the dishwasher either by unplugging it or shutting off the circuit breaker. Others are reset by pressing and holding the Start/Reset button on the control panel, then waiting a few moments before attempting to start a wash cycle.
Most common problems with Whirlpool dishwashers
The dishwasher does not drain properly. The detergent cup is not working properly. The dishwasher is not filling with water. The dishwasher door is leaking.
Reasons Why Your Dishwasher Is Not Working
The control lock is on. Sleep mode is on. You inadvertently turned on the delayed wash option. The dishwasher door is not fully closed and latched.
The life expectancy of a dishwasher is about 10 years, according to manufacturers surveyed by Consumer Reports. However, issues with the appliances tend to develop within the first five years.
Turn the washing machine off at the powerpoint for at least 60 seconds, and then turn it back on. With a little luck, the master reset should restart the wash programs.
This can happen if the door is opened during the cycle or power has been interrupted. Push the door firmly closed within 3 seconds of pressing Start/Resume. If the door is not closed within 3 seconds, the Start/Resume light will flash, an audible tone may be heard, and the cycle will not start.
Where is the dishwasher reset button? Dishwashers usually don't have a dedicated reset button on the control panel. You can reset your dishwasher by unplugging it from its power source for one minute and then plugging it back in.
Some models require powering down the dishwasher by unplugging it or switching off the circuit breaker. Others require pressing and holding the “Start/Reset” button on the control panel, followed by a brief pause before activating a wash cycle.
Touch any button that you see on your display pad. This will clear the error code. Or you can press PAUSE/CANCEL. Choose a cycle and press START.
To reset the washer's control panel:
If your washer is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in. If the washer is hard-wired to the power supply, turn the breaker off at the home electrical panel that powers the washer for one minute and then turn the breaker back on.
Make sure the dishwasher is in Standby mode (no cycle running). Press the "Heated Dry," and "Normal," buttons one after the other, twice. After entering the correct button sequence, the control panel should light up as the dishwasher begins the reset.
A start button on your washer's control panel not working despite the rest of the lights coming on is the most common Whirlpool washer issue you will encounter. Taking off the control panel to try and find the cause will let you see if the solution can be DIYed, or a professional needs to be called.
If unplugging the washer for 60 seconds doesn't work, try this: plug the washer back in and leave it for about 20 minutes. This gives the machine time to complete any unfinished cycles and unlock the door.
Issues like leaks, poor drainage, unclean dishes, foul odors and overall appliance operation, though infrequent, can be the most common problems with a dishwasher that isn't operating properly. In some cases, you can resolve these issues with a little elbow grease and the help of your product manual.
You're better off putting the money toward a new $500 appliance. But for a $1,000 dishwasher, a $140 repair is often worth pursuing for the better part of a decade. Most appliances are covered under warranty in their first year.
Whirlpool Dishwasher Door Latch
The dishwasher door needs to be properly latched for the appliance to work. If the latch is faulty, the door switch could signal the control board to stop the dishwasher in mid-cycle. Inspect the door latch for any damage and replace if necessary.