For stubborn shower stains, soap scum and grime, mix one cup of warm water, two cups of white vinegar and one teaspoon of a vegetable-based dishwashing soap in a spray bottle. Spray the solution on the shower walls, let it work for 15 minutes and use a sponge to scrub off scum and grime.
You can try equal parts Dawn dish soap and white vinegar in a spray bottle. Spray liberally on the shower surfaces and scrub with a non-scratch scotchbrite (you can also leave it on overnight first). Rinse it off with hot water.
All-purpose cleaner: Professional cleaners often use a high-quality all-purpose cleaner to clean the shower walls, tub, and fixtures. This cleaner can be used to remove soap scum, hard water stains, and other dirt and grime.
You can use baking soda and water, or use washing soda with hydrogen peroxide. Some people find it easier to use a toothbrush to apply solutions on the grout before scrubbing them off. This will allow you to reach all the necessary spots and clean your shower walls thoroughly.
For stubborn shower stains, soap scum and grime, mix one cup of warm water, two cups of white vinegar and one teaspoon of a vegetable-based dishwashing soap in a spray bottle. Spray the solution on the shower walls, let it work for 15 minutes and use a sponge to scrub off scum and grime.
Vinegar is good for cleaning because its acidic which means it's able to dissolve dirt, grease, grime and kill bacteria, making it perfect for cleaning your bathroom.
Baking Soda and Hydrogen Peroxide
Create a paste that is one part hydrogen peroxide to two parts baking soda. Apply the paste to your shower walls and allow it to work its magic for at least 30 minutes. Now scrub with a sponge or nylon brush and rinse with warm water.
One of the primary reasons your bathroom might not look its cleanest is due to hard water stains. Hard water contains high levels of minerals like calcium and magnesium, which can leave behind a residue that looks like soap scum or spots on faucets, tiles, and shower doors.
Steam Cleaning for a Sparkling Shower
High-temperature steam removes dirt and grime without harsh chemicals. Steam loosens dirt and soap scum, making it easy to wipe away without scrubbing. Once the dirt and soap scum are loosened, they can be rinsed away effortlessly, leaving your shower sparkling clean.
Our top pick is Clorox Clean-Up Cleaner and Bleach. Clorox Clean-Up Cleaner Spray does an excellent job getting your shower clean. Difficult stains melt away in just about a single swipe, with very little effort. Stains clinging to grout were gone after a pass or two.
Does The Pink Stuff remove stains? If it's a quick answer you're looking for, then it's a resounding “yes” from us. From limescale in the tub to stained pans in the kitchen, The Pink Stuff showed excellent cleaning power.
For tougher calcium or limescale build-up, a half water and half CLR mixture on a sponge will actively work to dissolve the stains. Repeat as necessary for excessive build-up of calcium, limescale or rust stains. CLR will work to dissolve the build-up layer by layer until it is all removed.
Moss, Mold, Mildew & Algae Stain Remover
Simply spray and walk away! That's it. Wet & Forget goes to work with the wind and rain to gently clean the surface over time. NO RINSE: Easy Spray & Leave Application. EFFORTLESS CLEAN: No Scrubbing, Rinsing or Pressure Washing.
Sprinkle baking soda on all tub surfaces. For extra-dirty tubs, use tub-and-tile cleaner instead. Fill your bucket with a half-gallon of hot water and two tablespoons of dish soap. Dip a scrub sponge or a stiff nylon brush into the bucket, and scrub all bathtub surfaces.
For a green solution: Mix in a bottle: lemon juice, vinegar, baking soda and water. Spray throughout and wait for 5 minutes. Scrub with white Clorox sponge while pouring more baking soda on the surface. Rinse well with hot water and repeat the process if necessary.
Most of these tips include the use of sodium carbonate, white vinegar or oxygen-based bleach (hydrogen peroxide, sodium percarbonate or sodium perborate as opposed to chlorine-based bleach). Oxygen-based solutions are indeed a safer alternative for indoor cleaning, are more eco-friendly and can be extremely effective.
Soapy Residue
This is usually a sign that you're not washing off all the shampoo or body wash off your skin. This left over residue that cause irritation and also also appear as dirt on skin.
Fill a spray bottle with white vinegar and spray the solution on the walls and doors, allowing it to soak for at least 10 minutes. For heavy buildup, let it soak for longer. Use a scrubbing sponge dipped in baking soda to scrub the glass.
Mix baking soda and white vinegar until forming a thick paste. Both products will bubble on contact, but don't worry. Then apply the mixture to the stained tiles and leave it there for an hour. Once the time's up, you can spray the tiles with more vinegar and wait until it stops bubbling.
Dish soap, known for its grease-fighting properties, pairs excellently with vinegar, which acts as a natural disinfectant and deodorizer. This blend not only targets stubborn stains and buildup but also leaves surfaces sanitized and fresh.
Vinegar has a very low pH level which means it's very acidic, so it can corrode some surfaces over time. For example, using vinegar on natural stone like granite or marble can dull and scratch the surface and it can corrode surfaces like unsealed grout, window seals, and fridge and dishwasher gaskets.
White vinegar, also known as distilled vinegar or spirit vinegar, is made by fermenting grain alcohol (ethanol) which then turns into acetic acid. Water is then added to the vinegar, so white vinegar is made of five to ten percent acetic acid and ninety to ninety-five percent water.