Improvised Plunger A plastic water bottle filled with water and inverted in the drain can serve as a plunger in a pinch. Simply push the bottom of the bottle as hard as you can into the drain (crushing motion).
If you experience a clogged toilet and don't have a plunger, there are other useful methods, including dish soap and hot water, baking soda and vinegar, Epsom salt, a metal wire hanger, and a plastic bottle.
Additionally, one of the big 2 l bottles (eg Pepsi) can serve as a makeshift plunger: Just cut off the base where the diameter of the bottle is bigger than the diameter of the toilet pipe, screw the cap, put the bottle into the toilet and press it together rapidly.
Try Boiling Water
It is a highly effective and straightforward blocked drain solution and involves boiling a pot or kettle of water and gradually pouring it down the blocked drain. Hot water melts FOG (fat, oil, grease) build-up, unblocking drains. Pouring boiling water creates a surge of heat, breaking down deposits.
Baking Soda and Vinegar
Make sure you clear any standing water in the sink first, then pour a cup of baking soda down the drain. Follow this with a cup of vinegar, and immediately put the rubber stopper in the drain. The mixture will fizz, and push the clog down. Follow with hot water from the tap to finish flushing.
Pour one cup of baking soda down the affected drain, immediately followed by one cup of white vinegar. You should let the mixture sit for anywhere from 15 minutes to one hour. Once you've let the mixture do its job, flush the drain with a pot of boiling water.
Baking Soda and Vinegar
Start by pouring about one cup of baking soda into the toilet bowl, followed by two cups of vinegar. This mixture will create a foaming action that can break down the clog. Let it sit for about 30 minutes, and then flush the toilet.
DIY drain snake method
All you need is a wire coat hanger, which you can unravel until it's straight. Then bend one end of it into a U shape, and push and pull this end in and out of the toilet to break up the blockage. Make sure you wear gloves for this one to protect you from any nasty germs or mess.
Use A 2-Liter Plastic Bottle
Fill the plastic bottle with warm water. You should wear rubber hand gloves when doing this since you'll get your hands into the bowl. Once you fit the top end of the bottle into the toilet bowl, place your thumb over it and squeeze to shoot out warm water.
The easiest and first thing to try when attempting to unclog toilets without a plunger is hot water. The addition of hot water might be enough to loosen the clog and dislodge the blockage. Fill a bucket with about a gallon of hot water from the sink or bathtub. Then pour the hot water into the toilet bowl.
Take a cup of rock salt and add 9 litres of hot water into a bucket. Dissolve the salt entirely and slowly pour it into the toilet. Let it work its magic overnight and flush in the morning. The rock salt down your toilet drain will break down any material, such as grease and debris.
To do this, mix half a cup of baking soda and the same quantity of salt in a bowl before pouring it into your clogged drain. Let this mixture sit for about 15 minutes, then flush it with hot water. Salt, baking soda, and hot water form a holy trinity that works brilliantly to clear the most stubborn clogs.
HG drain unblocker is a safe and extremely powerful liquid for effectively clearing blockages in just 30 minutes. Instructions for Use - Pour 300ml of HG liquid drain unblocker down the affected drain, and leave to work for approximately 30 minutes.
To make a drain snake, all you need is a wire coat hanger that you can unwind and straighten. Bend the end of the wire into a hook shape and insert it into the drain. Move it around until you feel resistance and then pull out any hair or debris that may be blocking the drain.
The Santeen Sulfuric Acid Drain Opener proved to be the most potent among all the chemical drain cleaners we tested, effectively dissolving 80% of the hair, 80% of the organic matter, 40% of the grease and 76% of the paper products.
Baking soda is abrasive, which, when used in large quantities, will cause the drain more damage. Additionally, the acidic nature of vinegar can eat away rubber and metal, damaging the plumbing. As these products break down the pipe and connectors in the plumbing in your home, it will cause more clogs over time.
All you need to do is simply bring a pot of water to a boil, and then slowly pour it down the drain once it has reached a rolling boil. You may have to repeat this a few times to fully clear the drain clog. Boiling water won't hurt your pipes in the bathroom sink, and you can repeat this method as many times as needed.
Pour one cup of fresh baking soda down the drain, followed by one cup of white vinegar. Place a rubber stopper or other sink hole cover over the drain opening. Wait 15 minutes to allow the vinegar and baking soda to unclog your drain, Then take out the drain cover and run hot tap water down the drain to clear the clog.
A straightforward yet effective approach to addressing a clogged drain pipe involves simply using hot water mixed with dish soap. This method, ideal for tackling minor blockages, leverages the degreasing power of dish soap combined with the force of hot water to dislodge and dissolve clog-causing residue.
Salt, Borax, and Vinegar
This potent mix is great for tougher clogs. Combine 1/4 cup of salt, 1/4 cup of Borax, and 1/2 cup of vinegar. Pour the gritty solution down the drain, followed by a pot of boiling water. Allow it to work overnight, if possible, before flushing with more hot water.