To check your water heater pilot light, first look through the sight glass at the bottom of the heater. If it's a newer model, check the gas valve's LED status light. If there is no blinking light or no small blue flame, the pilot is out and must be relighted.
Yes, you can safely relight a water heater pilot light yourself. Most units have a convenient push-button spark igniter, though some older models require a long match. Always air out the area first, and if you ever smell a strong sulfur or rotten egg odor, do not attempt to light it and call your gas provider immediately.
To tell if your water heater pilot light is out, the most obvious sign is a sudden lack of hot water. You can confirm this by removing the access cover at the base of the water heater and visually checking for a small, steady blue flame through the sight glass.
The longest-lasting water heater brands are Bradford White and Rheem (specifically the Marathon series). Bradford White is favored by plumbers for professional installations and longevity, while the Rheem Marathon uses a unique fiberglass tank backed by a true lifetime warranty.
Inspect Your Water Heater
Most water heaters will have a reset button, though some gas water heaters require you to relight the pilot light. This button may be near the unit's thermostat, but most water heaters have a removable metal panel on the side that houses the button. Use a screwdriver to remove this panel.
If your system doesn't have an igniter button, you'll need to manually light the flame using a long match or long lighter. With the gas regulator valve in the “Pilot” position, light your multipurpose lighter and depress the reset button, if your furnace or water heater has one.
There isn't a single "number 1" model, as the ideal water heater depends on your home's setup, but top-rated brands dominating the market include Rheem (best overall tank/tankless) and A.O. Smith (best for durability and commercial-grade units).
This problem usually comes down to capacity, heat production, or mixing issues inside your plumbing system. Sometimes the fix is simple, like adjusting your water heater temperature or flushing out sediment. Other times you may need a new mixing valve, an element replacement, or a different size water heater.
Keep the top of the tank free of dust, debris and flammable products such as paint, gasoline, solvents or adhesives. Also, never use these products near a water heater or any other natural gas or electric appliance because vapors from flammable liquids can ignite.
If you suddenly have no hot water, the very first step is to isolate whether the issue is with a single faucet or your entire home. If it affects the whole house, your water heater is the culprit, and you should check the following based on your system:
SIGNS OF PILOT LIGHT ISSUES
A weak or flickering light indicates dirt accumulation or blockages in the pilot light assembly. This results in hindering gas flow. The consistent extinguishing of a pilot light is another sign that indicates a faulty thermocouple or problems with the gas supply.
The pilot light on your water heater is the little blue flame used to light the gas streaming to your heater from the gas pipes coming from outside your home. While some people believe that a water heater turns on when the pilot light ignites, traditional pilot lights are lit 24/7.
After successfully lighting the pilot light, it typically takes 30 to 60 minutes for a gas water heater to fully heat a tank of water. The exact time depends on the tank's capacity, the temperature setting, and how cold the incoming water is.
Pilot Light Issues: The pilot light may go out due to a blocked or damaged thermocouple. Relighting is typically inexpensive unless the thermocouple requires replacement, which can range between $120 and $300.
Only heat the hot water twice a day
Try heating the water for an hour in the morning and an hour in the evening. Start the water heating about an hour before you need it. For example, if you shower at 08:30, start heating the water at 07:30. If you wash up in the evening at 19:30, then start the water heating at 18:30.
The 4-minute shower rule is a sustainability and cost-saving initiative advising people to limit their daily showers to four minutes or less. This practice helps conserve water, reduce energy used for heating, and lower household utility bills by limiting consumption to approximately 36–40 liters (roughly 9.6–10.5 gallons) per shower.
A tap or shower that keeps switching between hot and cold water could be a sign that the heat exchanger inside a combi boiler is blocked. Sludge and sediment buildup is fairly common in older boilers, especially when the filters are old. This blockage will then cause water to run hot and cold intermittently.
Plumbers most highly recommend Bradford White, A.O. Smith, and Rheem. These brands are heavily favored because they are highly reliable, have readily available replacement parts, and use superior internal components compared to budget models.
Because they don't use a storage tank that could be prone to leaks or rusting, tankless heaters tend to last longer than tank heaters. Tankless models can last up to 20 years. These models also experience less daily wear and tear because they don't need to constantly switch on to reheat the water throughout the day.
It's sometimes called the “flame sensor.” It shuts the gas off if the pilot goes out. Gas that flows through your furnace could enter your house if the thermocouple fails to turn it off. Protecting your home from gas buildup is the thermocouple.
With a 40-gallon tank, your hot shower will typically last about 10 to 20 minutes. The exact duration depends heavily on your showerhead's flow rate and the temperature you set your water heater to.
Why won't my pilot light heater turn on? The pilot light heater will have trouble turning on if the unit has a faulty thermocouple, a clogged pilot tube, low gas pressure, a malfunctioning gas valve, or drafts that can blow out the flame.