To avoid dangling wires when mounting a TV, use an in-wall cord management kit or a raceway cover. First, mark where the TV will go, then fish cables through the wall cavity or apply paintable, adhesive cord tracks to the wall surface.
Hiding the wires from a mounted TV can be done safely and easily using an in-wall cable management kit, a surface-mount cord cover, or simple furniture placement. Choose an in-wall kit for a clean, professional finish, or a cord cover for an easy, renter-friendly solution.
1. Hide TV Wires In Your Wall. This is the cleanest solution if you live in your own home and aren't afraid of putting a hole in your wall. This method allows you hide wires behind a wall mounted TV by using recessed cable plates or a hidden wall cavity to completely hide all cables from sight.
There are two main options:
10 Mistakes to Avoid When Mounting your TV to a Wall
Drywall alone is not strong enough to securely hold a TV, but it can support one if you use specialized hardware, specifically heavy-duty toggle bolts. While attaching directly to wall studs is always the safest method, you can use toggle bolts for smaller, lighter TVs if they are under 50-60 lbs.
Always lay a TV face up. Laying it face down puts direct pressure on the fragile, ultra-thin display panel, almost guaranteeing damage or cracks. However, modern TVs are designed to be weight-balanced vertically, so only lay them flat for brief, necessary tasks like attaching a stand.
Yes, coaxial TV cables do carry electricity, but it is a minuscule amount. The signal travelling through the wire is a low-voltage alternating current.
Yes, you can mount a TV on drywall, but it is not recommended to use drywall alone for heavy TVs or full-motion mounts. Drywall is not meant to support cantilevered weight. The safest installation relies on wood or metal studs, heavy-duty anchors, or a backing board.
Wire Raceways
A simple solution to hiding electrical wires and cables is mounting raceways to the surface of the wall or ceiling, and conceal the wires running inside. Some are even designed to look like trim, molding and baseboards.
You can also poke a hole in the wall behind the TV, and another hole behind the TV stand and run the wire through a conduit. There's nice looking hole caps/edging to make it look professional. Through the wall or a cord "hider", usually a nearly flat "tube" that you run cables through and paint to match.
Utilize Small Clear Clips on the Backs of Furniture
One of the best things about these clips is that they're inconspicuous and stick to almost any surface, from painted walls and tile material to metal and glass. And these clips can be used to hide cords on walls, TV console legs, under the console, and more.
Yes, you should always drill into studs when mounting a TV. Drywall alone cannot support the weight. Screwing into wall studs ensures the television remains securely anchored and prevents it from falling.
Professional installation to hang a TV and hide wires typically costs between $150 and $400 for basic drywall. For complex setups (e.g., masonry walls, above fireplaces, or installing a new electrical outlet behind the TV), the cost can jump to $500 to $800+.
You can easily hide the cables from your TV by either running them behind the wall or by hiding them along the wall with a paintable cable cover. If you're running them behind the wall, create two holes – one behind your TV and one where your cable box or entertainment system will go.
Yes, you can mount a 65-inch TV on drywall, but only if you use the right hardware and a flat/fixed wall mount. Because a 65-inch TV is wide and applies leverage, never use an articulating (full-motion) mount on drywall alone, as the pulling force can easily rip it out.
Standard 1/2" drywall with quality toggle bolt anchors can support 50–65 lbs per anchor in pull-out load. With four anchors spread across a TV mount, well-installed systems can hold 150–175 lbs.
Drywall can safely hold upwards of 150lbs if you use the right kind of wall anchor or bracket system. Toggle bolts, molly bolts, and expansion anchors are all designed to spread the load behind the wall rather than relying on the paper-thin surface layer of drywall.
People are canceling cable TV primarily to avoid skyrocketing monthly bills and to escape rigid channel bundles that force them to pay for networks they never watch. By replacing cable with internet-based alternatives, viewers gain on-demand flexibility without restrictive, long-term contracts.
To check if a cable has power, the safest and easiest method is to use a non-contact voltage tester (NCVT). For exact voltage readings or troubleshooting, use a multimeter.
Yes, leaving a TV plugged in uses electricity even when it is turned off. This phenomenon is known as "vampire power" or "phantom load".
55″ TV: Sit between 7 and 11.5 feet away. 60″ TV: Sit between 7.5 and 12.5 feet away. 65″ TV: Sit between 8 and 13.5 feet away. 70″ TV: Sit between 9 and 14.5 feet away.
We've consulted the experts and uncovered six of the most common mistakes people make when placing the television, and how to avoid making them yourself.
Samsung had held the top position in the global TV market since 2006, and according to market research firm Omdia, the company recorded a 29.1% share of the global TV market in 2025. This achievement reinforces Samsung's leadership across premium, ultra-large and next-generation display technologies.