To keep pavers looking their best, plan to clean and reseal them every three to five years. Clean your pavers each Spring with a coarse-bristle “stable” broom and a paver cleaner to keep them looking like new. Some weeds, if left unaddressed, can shift pavers apart over time.
Pavers should be cleaned and sealed every two to three years depending on how often they are exposed to traffic, liquids, sunlight etc. Paver surfaces can also be power washed between cleanings but paver sealing is still necessary after paver cleaning has occurred.
The basic rule of thumb is every 3-5 years. For film-forming sealants, you will be able to notice when the physical barrier is showing signs of wear. For non-film-forming sealants, you will begin to see a significant color change of pavers during a rain when the sealant is wearing thin.
However, because concrete is a porous material, they still require sealing and routine cleaning to keep them looking and performing great for decades to come. In this article, we share what you need to know about sealing and cleaning architectural-grade concrete pavers.
Mild detergent and water.
Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers. If your pavers are textured or have intricate designs, this cleaning method can be gentler than a power washer.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
Yes, you can pressure wash your pavers. But while using a pressure washer at a basic level is simple, ignorant and inexperienced users can easily damage their pavers by using a stream that's too powerful, by holding the wand too close to the pavers, or by falling into any number of other rookie mistakes.
An influx of water that sits for a long period of time can damage your paver surfaces by weakening the cracks or chips already present. If your pavers are already loose, they may collapse. Flooding can also lead to erosion when soil and rock are transported and deposited into the area.
Pavers are naturally a low-maintenance solution, but sealant them actually requires more upkeep over time.
The good news is that pavers are known for their durability and lifespan. Made of clay, concrete, natural stone, or even porcelain, pavers can last 20-25 years without any major repairs with proper care and maintenance. If they are properly cared for and sealed, concrete pavers can last upwards of 50 years.
You're wondering what happens if you don't seal pavers. Your pavers won't disintegrate if you don't seal them, but they'll likely fade much sooner than if you applied sealant. You'll also need to clean them more often, and the stains won't be as easy to remove.
How Much Does It Cost to Clean and Reseal Pavers per Square Foot? In total, you should expect to pay around $2 per square foot to clean and seal pavers. The price may vary between $1 and $3 per square foot, depending on the sealant and method of cleaning.
The easiest test is by letting water sit on your pavers for about 20 minutes. If the water beads up on the surface and does not leave a stain, your sealant is still working, if it sinks into the paver, however, then a fresh coat of sealer is likely required.
Fall or spring is a great time of the year to seal pavers. Cooler weather allows the sealer to penetrate into the pavers unhindered. Pavers will have an adequate amount of protection for when it's time to seal again. Make sure to keep leaves and other debris off the pavers while they are drying to avoid blemishes.
Efflorescence is also known as calcium hydroxide or free lime. The phenomenon of efflorescence occurs when water soluble salts migrate to the surface of the paver with the help of water (i.e., condensation, rain).
Pavers are great for patios, since they allow water to seep through and not form puddles and pools.
It's simple science. Water moves in between things and by adding pavers to your landscaping, you're ensuring there are cracks and joints between them, which allows water to drain through. One thing to remember though is to allow sufficient space between pavers to allow water drainage.
It's recommended that the scheduling of these projects should be in early spring, right after the winter frost has melted. Here, you will find a few important reasons behind this guidance. Working outdoors is easier when it's not too cold or warm for comfort.
Should you re-sand brick paver joints? Brick pavers absolutely, 100% need to be re-sanded prior to sealing. The sand in the brick paver joints serves MANY integral purposes.
Mix Solution of dish soap and water, and use a brush to scrub the pavers clean. Make sure to rinse the pavers thoroughly afterward. This process may need to be repeated for tough stains. A recommendation is to do this every few months.
Dish soaps are ideal for this job. While they feature surfactants that are able to remove tough grime like oil and grease, they are also safe enough to use on paving stones without compromising their integrity or appearance.
Understandably, some will think this indicates the blocks are in some way faulty, sub-standard or iffy, but that's not necessarily the case. The cause for this visible difference in appearance is most commonly* a variation in the concrete used to make the blocks.
If the pavers are wet due to a pressure wash, allow them at least 24 hours to air dry. They may need a reseal after a deep clean, which is crucial to wash away residue. Excessive moisture from intense heat can also hinder the sealing process.