Run your filter pump for at least 12 hours a day, every day. This will make sure all the water in your pool circulates at least once. In an ideal world of bottomless money vaults, you could run your pool pump 24 hours a day, but 12 hours is a good compromise.
During the highest of summer temperatures, run the filter pump for at least eight hours per day. In warmer climates you will find yourself needing to add more chlorine to meet demands because it dissipates faster in warm weather. The pool chemicals need to circulate, which is why the filter pump must run for that long.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
Guest. Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.
Replace your Type A Filter Cartridge as often as every two weeks for a sparkling clean pool! Product Dimensions: 8"H x 4.25"W.
Things You'll Need
The Intex pool pump uses a filter cartridge, which you need to clean weekly or daily depending on the amount of use the pool gets during the week. The filter cartridge cleans the water and traps debris as the water filters from the pool to the pump and back to the pool.
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
Intex pools -- the same as with all other swimming pools -- require a filter, pump and the appropriate chemicals, such as chlorine, to keep the pool water clean and sanitary for swimmers.
Without Chemicals
If a parent chooses not to use chemicals in the kiddie pool, the water must be drained after the children are done using it. This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day.
Most pool professionals agree that the water level in both in-ground and above-ground pools should be at the midpoint of the pool skimmer.
Even if you have your pool covered, some debris may still get in it during the winter. For this reason, you should consider running your pump on occasion whenever the outdoor temperature is between 35 and 65 degrees. Around four to six hours should be sufficient to remove debris and help promote good circulation.
For Intex pools, the go-to approach is to place 2 to 3 chlorine tablets in a floating chlorinator for slow-dissolve release, topping up when they start to run low. You'll want to keep the chlorine level at around 1 to 3 ppm. Any higher and the water will be too harsh on your skin and eyes.
Depending on how much you have added and the size of your pool, it is generally safe to wait about 4 hours after adding liquid chlorine or until levels reach 5 ppm or lower.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
Chlorine serves a vital purpose in keeping swimming pool water clean and healthy. In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done.