The accumulated water must be emptied after each drying cycle. However you can also set up your dryer to drain automatically using the drain hose provided.
Vented dryers expel hot, moist air outside through an external vent. Heat pump tumble dryers, on the other hand, reuse the hot air to minimise energy consumption, making them the most energy-efficient option. Heat pump dryers also require the user to empty the water tank.
If you own a condenser or heat pump tumble dryer, you'll need to empty the water tank between uses, too; otherwise, it'll hold up the next cycle until it's emptied.
Samsung Heat Pump Smart Dryers come with a water tank to drain water, which is recommended for you to empty after each use to prevent leaks.
Your Heat Pump Tumble dryer comes with a built-in water tank to drain water. However, if you do not want to use the water tank, you can install a drain hose instead. A long drain hose is provided and can be used as an extension to the main drain hose. 1 Locate the drain hose on the rear of your washing machine.
1 Using both hands, pull the water tank (A) forward to remove. 2 Empty the water through the drain hole (B) and place the water tank back into place. Please note: If you empty the water tank and press and hold Start/Pause, the corresponding indicator turns off.
Heat pump tumble dryers are one of the best types of tumble dryers on the market today. They're more energy efficient and cheaper to run, kinder to the environment, and provide better protection for your clothes. You can place them anywhere you like in your home with no issues.
No. To avoid a fire hazard you should always ensure that you don't leave your dryer running when you're not at home.
Full water tank
If it uses a water tank (more likely), then this needs to be removed and emptied periodically. Otherwise, the dryer will stop working. Removing the tank is usually straightforward, so you might as well get into the habit of doing it after each wash.
This is because all the heat pump's energy is used to heat and evaporate water/moisture in the clothing. Let the appliance run through the selected cycle until the desired drying results have been achieved according to the chosen cycle and options.
Don't leave appliances unattended – don't turn the tumble dryer on before you leave the house or go to bed.
Heat pump tumble dryer running costs
On average, a heat pump dryer uses just 2.16 kWh for a full load cycle, costing approximately 53p per cycle – less than half the cost of vented or condenser models.
1. Hotpoint ActiveCare NTM119X3EUK. Hotpoint, which is owned by the same company as big appliance names Indesit and Whirlpool, is AO tumble dryer expert Gwil Snook's top choice. He says, “The Hotpoint ActiveCare Heat Pump Tumble Dryer is a super-efficient option with an A+++ energy rating.
The water tank must be emptied after every cycle.
Heat pump dryer: energy-efficient from A+++
This example is based on a dryer that lasts up to 10 years on average, depending on its usage.
Air-vented dryers draw air from the room in which they are installed, heat it and lead it through the humid clothing in the drum to evaporate the moisture. The humid air is then expelled to the external environment. Air-vented dryers thus require an exhaust to the outside, making them less practical.
Introduced to the market in the early 2000s, heat pump dryers are known for their high energy efficiency and low carbon footprint. They are also known to take longer to dry clothes compared to traditional vented dryers, which can be a disadvantage for some users.
Heat pump tumble dryer installation
These models often need more room for air circulation but don't require external venting. You can choose between a water container or direct drainage for moisture removal. Heat pump dryers work best in spaces above 10°C, so keep this in mind when choosing a location.
Whether homemade or store-bought, tumble dryer balls can further improve the efficiency of your heat pump dryer.
Heat pump dryers, on the other hand, are condenser dryers. This means the moisture is collected in an onboard water tank instead of vented into the room. You do have to occasionally empty the tank but you can use this water on your garden, or you can plumb the dryer into a drain.
Is it Safe to Run a Dryer Empty? Yes, you can run a dryer without any clothes inside it. An empty clothes dryer requires less energy output and doesn't pose any extra risks.
As their drying air temperature is considerably lower than conventional dryers, heat pumps are less abrasive on your garments. They feature multiple sensors to detect moisture, so your clothes are dried more consistently and treated with better care. This saves you from replacing them due to wear & tear or shrinkage.