The average system uses approximately 15-16 gallons per minute, per station. Here is an easy formula to help you calculate the approximate amount of water you are using each month.
Watering with a typical sprinkler using a standard 5/8" garden hose for one hour uses about 1,020 gallons of water; if you water three times per week, that's about 12,240 gallons per month.
Normally each sprinkler head can deliver anywhere from I to 6 gallons per minute. A typical residential water meter can deliver 30 gallons per minute. With this in mind; 5 sprinkler heads can use 30 gal/min.
It is ideal to water lawns about one inch of water per week. To determine how long you need to water to get one inch, place a plastic container in your yard and set a timer. On average, it will take 30 minutes to get a half inch of water. So, 20 minutes, three times per week will give a lawn about an inch of water.
The answer is that it usually takes up to 30 minutes to get a half inch of water. Watering 3 times per week equals to an inch of water on a lawn.
The average system uses approximately 15-16 gallons per minute, per station.
If your sprinkler output is 1½ inches per week, your sprinklers should run for only ⅓ hour or 20 minutes that week (½ divided by 1½). On a twice-weekly watering schedule, run your sprinklers 10 minutes each time.
Sprinklers generally cover up wider ground and spread out water at a slow yet steady pace, which makes all the soil moisturized evenly and soaked underground. A watering hose takes time to cover space and can clutter the soil if there's too much water.
1. Water Thoroughly: Rotor zones should run for about 30-40 minutes per zone and spray zones 10-15 minutes per zone. 2.
For conventional sprayheads, precipitation rates typically range from 1.3 inches to 2 inches per hour. For gear drive rotors, precipitation rates typically range from 0.4 inch to 1 inch per hour. For rotary nozzles, precipitation rates typically range from 0.4 inch to 0.6 inch per hour.
To calculate the amount of water you use, multiply the width times the length of your yard in feet to get the number of square feet of area. Then multiply that figure by 0.623 to come up with the number of gallons used (or use our calculator below).
That might not sound like a lot, but your sprinkler system uses about 12 gallons of water per minute, which works out to 2,160 gallons or $13 over three hours. A leak in the system will spike your water bill even higher.
How Long Should I Water at a Time? A watering session should be long enough to soak the area sufficiently so all the roots receive a beneficial drink. Sprinklers should be set to run for about 30 to 35 minutes at a time twice a week.
Typical sprinkler flow rates may vary from 4 gallons per minute (gpm) from a 5/32-inch nozzle at 30 pounds pressure to over 11 gpm from a 7/32-inch nozzle at 70 pounds pressure. The nozzle size is usually stamped on the nozzle. Wheelmove systems typically have 3/16-inch nozzles.
A common rule that is followed for obstructions within 18 inches of the sprinkler deflector is the “three times rule”. This requires sprinklers to be positioned away from obstructions a minimum or three times the maximum dimension of the obstruction.
Don't water everyday.
The more shallow your grass roots are, the less hearty it will be in hot weather. Instead water about two times per week for longer periods of time. The local lawn companies I have spoke with around my area (North Central Texas) recommend about 20-30 minutes per watering cycle twice a week.
Watering in the morning (before 10 a.m.) is the best time for your lawn; it's cooler and winds tend to be calmer so water can soak into the soil and be absorbed by the grass roots before it can evaporate.
Install sensors to shut off irrigation systems if it starts raining. Modify sprinkler patterns to match the lawn, garden, or decorative shrubs, and eliminate watering the driveway, parking, or pavement. Raise sprinkler heads that are blocked by shrubs or other foliage.
Not Adjusted to Properly Cover the Right Areas
If one sprinkler head sprays over another one, this leads to overwatering and wasted water and money. Your grass and plants will absorb what they need to survive. Water they don't need will sit and pool on the surface of your grass.
Most sprinkler systems use around 12 gallons of water per minute. If left unchecked, that could mean a lawn filled with standing water. A general rule of thumb is to water three days a week in the spring and summer and two days a week in the fall and winter.
Avoid watering grass on a hot afternoon when it's 95 degrees or higher. The best time to water grass is at dawn or in the early evening. Water deeply three times a week instead of a little water daily. Test whether your sprinkler system is watering your lawn evenly.
Most lawns need to be watered no more than three days a week in the spring as well as in the summer and two days a week in the fall. This watering schedule is recommended under normal water supply conditions.