If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
There's no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it'll take longer. If you have a large driveway with lots of stains, you'll want more power to do the job faster. I chose the 3,100-psi gas pressure washer and cut the job time in half.
Our recommendation ranges from as low as 3,000 PSI to as high as 4,000 PSI. But, there are quite a few factors at play influencing your ideal PSI rating.
Medium Duty 2000-2800 PSI
This classification ranges from as low as 2,000 PSI to as high as 2,800 PSI. You can use a medium-duty pressure washer for almost any surface. They're great for cleaning concrete, brick, and wood.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
Foundations, Driveways, Patios, RV Slabs, Sidewalks
A strength of 4,000 psi (pounds per square inch) after a one month cure is the industry minimum for concrete driveways, slabs, and sidewalks. However, 4,500 psi as the ideal.
Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.
Often more affordable than higher strength concrete, 2,500 PSI can be useful for driveways and walkways. However, some may choose a stronger concrete, like 3,000 PSI, to avoid excessive cracking. A good use for this concrete is a walkway on the side of a home that doesn't receive excessive traffic.
Domestic vs Industrial or Professional Pressure Cleaner
If your pressure cleaner only goes up to 1500 psi at maximum, you can still clean your driveway. However, take note that it may take a little longer and more effort, and there may be some dirt and stains it will not get out.
The RYOBI 1800 PSI 1.2 GPM Electric Pressure Washer is the perfect powerful yet portable option to get the job done. This pressure washer is ideal for light duty applications like cleaning small driveways, sidewalks, decks, windows, patio furniture, campers, bikes, boats, and many other recreational applications.
The quick answer is yes, power washing can degrade a concrete surface.
Concrete typically takes 24 to 48 hours to dry enough for you to walk or drive on it.
Pavement and floor slabs in homes and business are made of concrete at 4,000 PSI and able to withstand traffic and support heavy loads. Concrete that exceeds 5,000 PSI is used in special construction projects that require building materials that are able to withstand heavy impact and extreme wear and tear.
Most people believe that concrete is solid and almost invincible. However, using a pressure washer with the incorrect tip or using too much pressure or a combination of the two can etch concrete.
PSI Pressure range for Different Surfaces
Different surfaces require different levels of PSI pressure. Generally, for most residential uses, an electric pressure washer (less than 2000 PSI) will suffice. Soft surfaces, such as decks and siding, usually require more cleaning power than harder surfaces such as driveways.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively.
The typical concrete strength used for a driveway is in the 3000 psi to 4000 psi range, although temperate areas of the country may use lower strengths. Contractors, when ordering ready mixed concrete, should advise the producer of the intended use for the concrete.
Any machine capable of producing at least 1,500 pounds per square inch (psi) of pressure can clean concrete, but the work will go much faster if you choose a model producing 2,500 to 3,000 psi, like the gas-powered option below.
Traditional concrete walls and columns tend to range from 3,000 to 5,000 psi, while 4,000 to 5,000 psi is needed for pavement. Concrete structures in colder climates require a higher psi in order to withstand more freeze/thaw cycles.
It is generally recommended that you wait at least a week before driving on the surface with a passenger vehicle. Even then, the slower curing areas, such as the edges, will not be as hard as they need to be. For this reason, you'll want to be careful until the concrete is fully cured.
If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
2,000 to 3,000 PSI
Good for cleaning concrete surfaces with light to moderate oil stains, most automotive cleaning, pools, many industrial applications.
Choosing a Pressure Washer
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi).
LIGHT-DUTY pressure washers in the 1,300 to 1,700 PSI range are great for cleaning patio furniture, lawn equipment, stairs, and vehicles such as automobiles and small SUV's.