Moving a Thermostat: If the required wiring exists at the desired location, moving a thermostat may cost as little as $65. However, moving the unit can entail installing new wiring and cutting and patching drywall, so the project can cost up to $450.
Fortunately, in many cases, moving a thermostat is a DIY job that requires a few basic tools. In fact, if you're moving the thermostat to an adjacent wall or replacing the interface, the project may last just an hour or less.
Moving a thermostat costs $65 to $450, depending on if there is wiring already in place at the new location. If wiring already exists, it's just a matter of patching up the hole at its previous location and affixing the thermostat to its new home.
If you're moving your thermostat to a different room, however, you'll likely need the aid of a professional HVAC technician. They'll have to run a new set of control wires from your HVAC system to where you'd like your thermostat to be situated.
If however, your desired new thermostat location resides far away in another room distant from existing infrastructure, strongly consider hiring an HVAC technician to safely perform the complex wiring rerouting involved.
The Average Cost to Install a New Thermostat
The average cost of a new thermostat, including installation, ranges in price from $50 to $500 or more based on several factors including the type of thermostat, labor costs, the complexity of the installation, and more.
Yes! An electrician or gas engineer will usually be the best tradesperson to install a smart thermostat.
When it comes to thermostat installation and anything else HVAC-related whether it be installations, repairs, or maintenance, it's always best to call a reputable HVAC company like this one here to make sure that the installation would be done properly by a professional and experienced HVAC technician.
In many cases, installing a basic thermostat can be a DIY project for those with some electrical knowledge and experience. However, if the installation involves wiring or electrical systems beyond your expertise, it's best to leave it to a licensed electrician to ensure safety and proper functionality.
In most cases, installing a new thermostat is a relatively simple do-it-yourself project that can result in improved comfort and convenience and one that can help you save energy.
Installation typically takes about 1 hour.
The cost to run a new thermostat wire could range from $115 to $300. The technician has to rewrite the thermostat (or even other parts of the HVAC system).
Moving a Thermostat: If the required wiring exists at the desired location, moving a thermostat may cost as little as $65. However, moving the unit can entail installing new wiring and cutting and patching drywall, so the project can cost up to $450.
Ideally, you should place your thermostat in a room that you use frequently so your thermostat is reading accurate temperatures. You should also place your thermostat on an interior wall that is unobstructed by household items.
To move your Smart Radiator Thermostats or Wireless Temperature Sensor from one room to another, go to your tado° app and follow the steps below: Go to Settings > Rooms & Devices. Select the device you would like to move.
The thermostat may be replaced or installed in a house, apartment, or business by an electrician in two hours or less for around $65-$85 per hour — with a total labor cost of less than $170.
A bad thermostat can be detected when your AC or furnace is not turning on, your HVAC systems are not turning off, the thermostat not responding, your HVAC system is short-cycling, the room temperature not matching the temperature displayed on the thermostat, and the programmed setting resetting themselves.
Pros do More
Some of you may be asking, “Why would I call a professional if the installation instructions are right here on the box?” Hiring a professional is ensuring that the job is done right. Also, the electrician will do more than just install the new thermostat, move it to a new location, and/or add new wiring.
HVAC repair pros are a good option if you're looking for someone to replace a thermostat. In fact, you may find that many thermostat installers work with an HVAC company. Plus, by hiring an HVAC expert to replace your thermostat, you can also book an HVAC inspection at the same time.
Yes, many smart thermostats are designed for DIY installation, and manufacturers typically provide step-by-step guides and videos. However, if your HVAC system is older or lacks proper wiring (like a C-wire), the installation might become more complex, and you may need professional help.
However, in most cases, you'll need the help of a qualified electrician or gas engineer to install your smart thermostat safely.
A wire labeled RH carries power to the heating system, while an RC wire provides a power connection between the thermostat and your cooling unit.
Other smart devices, such as smart switches, smart thermostats, smart doorbells, and security cameras, may be hardwired, which would firmly place them into the “fixtures” category.