How Much Does a Well Inspection Cost? An average well inspection ranges from $300 to $500. This depends on the inspector's rates as well as the type of water tests they intend to conduct to check water quality. It also depends on whether they provide a septic inspection as well.
Regular checkups of water wells are imperative to ensure the safety, functionality, and proper operation of a private water well. Naturally, you should leave this to licensed professionals who can conduct detailed water well inspections that help unveil potential issues, including health risks or poor water quality.
Here's a homeowner's well maintenance checklist from the NGWA: Always use licensed or certified water well drillers and pump installers when a well is constructed, a pump is installed, or the system is serviced. An annual well maintenance check, including a bacterial test, is recommended.
With some basic training and equipment, home inspectors can offer water quality testing as an ancillary service or as part of their standard home inspection. In many areas, mortgage lenders require water quality testing for properties with private wells.
Well inspections run between $300 and $600 for an average cost of $450. A pro can offer a more accurate estimate for your well based on its type, depth, and other factors. The cost of a well inspection ranges from $150 to $900, with most people paying around $450.
Homeowners with municipal water pay for their water service, which includes testing and maintenance fees. In a home with a private well, maintenance and water testing are the homeowner's responsibility.
Contact a local water well contractor and ask if he or she conducts the type of maintenance check described. You can locate NGWA member- or certified-contractors in your area through the Find a Contractor section on this Web site.
Some counties offer free well water testing, so check with your county first. If they don't, use this EPA website to find a list of state-certified laboratories in your area that do water testing, or contact your county or state health department or your State Certification Officer for assistance.
Check the wellhead (the part of the well that's above ground) and the well cap (the part that covers the wellhead) several times a year. Look at the wellhead casing and cap for any cracks or openings that shouldn't be there. The cap keeps rainwater, insects, and small animals from getting into the well.
A typical well inspection takes 1–2 hours.
The inspector should return a detailed well inspection report of all their findings within 1–3 days, though you may have to wait longer for your water test results.
A typical inspection normally takes 1 ½ to 2 hours, and we run the water for up to an hour as needed.
However, if you're unfamiliar with well water, you may find yourself hesitant to buy the house. It's important to know that when well drilling is done right and a proper filtration system is used, well water is perfectly safe.
Water well inspections are not typically included as part of a regular home inspection. However, home inspectors may be asked to perform a well inspection and water testing. The state where the well is located may have rules regarding who can inspect and/or perform water testing on private wells.
A well inspection includes checking all of the well components, water pressure flow rate, water level before and during pumping, pump motor performance, pressure tank performance, and well water quality. Well inspectors measure the volume of water pumped and the rate at which the pump works.
Symptoms include diarrhea, vomiting, cramps, nausea, headaches, fever, fatigue, and even death sometimes. Infants, children, elderly people, and people with weakened immune systems are more likely to get sick or die from disease-causing microorganisms in drinking water.
ESDHD recommends homeowners have the well sampled at least once a year for bacteria, and every 5 years for chemicals, or if any change in odor, taste, or color. contaminants can seep into the well and may be potentially hazardous to drink.
The average price to get your well pump back up and running is $972. However, well pump repair costs can go as low as $373 and as high as $1,620. While that seems like a pretty big price difference for this repair, it's based on factors like well pump parts and labor costs.
You might also call your water well professional to plug your well or help you hook up to city water. A plumber will deal with clogged pipes inside the house while the water well professional will take care of clogs outside the house.
To perform a well water quality test, a certified AmeriSpec inspector will come to your home and collect a sterile sample from your water source. They will typically collect water at the well and from your tap for comparison.
~ In California the buyer is responsible for property inspection. However sometimes the owner/seller will have a property inspection before sale and make this report available to any prospective buyer .
If your water is coming from your own private well, then you won't get a monthly water bill. If you are using a septic system, you won't be getting a monthly sewer use bill. Having less bills is normally a good thing. Well water is normally fresher, high in nutrients, and high in minerals.