Replacing a garage door spring costs between $150 and $350 for a single spring, or $300 to $700 for a double-spring system, including both parts and professional labor. Expect DIY parts alone to cost between $30 and $115.
If your garage door isn't opening or closing properly, you may need to replace the door's springs. Garage door spring replacement costs $250 on average, with prices often ranging from $150 to $350 or more.
Replacing garage door springs is a task that carries significant safety risks. While some homeowners attempt this repair, it is important to understand the differences between spring types and the dangers involved.
No two garage doors are exactly alike, which is why spring repair pricing can differ from one home to another. Factors such as door weight, spring type, and installation complexity all play a role. Local labor rates, service availability, and the urgency of the repair also influence cost.
Yes, you can manually open a garage door with a broken spring, but it is extremely heavy and dangerous. A standard door weighs 100 to 150+ pounds, and the springs typically bear all that weight. Without them, you are lifting the dead weight yourself.
How to Close a Garage Door With a Broken Spring. To close your garage door, reverse the steps for opening it: Start moving the garage door down to get it out of its resting place on the horizontal rails. With another person, slowly guide the garage door down until it's closed.
You'll be able to tell your coil spring is broken by:
No, you should not use standard WD-40 on garage door springs. Standard WD-40 is a water displacer and degreaser, not a lubricant. It will wash away existing grease, cause the springs to dry out, and can even attract dust and dirt.
The average garage door spring lifespan is seven to 10 years or approximately 10,000 opening and closing cycles. You can maximize the lifespan of your spring with regular maintenance. The lifetime also varies by spring type and quality.
It usually ranges from £100-300 depending on your vehicle, and you can pay online.
Garage door springs break every 7 to 12 years on average. Instead of time, their lifespan is measured in "cycles" (one cycle = one full open and close). Most standard springs are rated for 10,000 cycles.
Is it worth repairing a 20-year-old garage door opener? Generally, it's not. Garage door openers typically have a lifespan of 10 to 15 years. A new opener is often a better purchase because it comes with updated safety features and runs more quietly.
There are two primary types of garage door springs:
Replacing a garage door spring is moderately difficult and carries high safety risks due to the massive amount of tension the springs hold. While extension springs are somewhat manageable for experienced DIYers, torsion springs are extremely dangerous and are widely recommended to be handled by professionals.
In some cases, the uneven tension can even cause damage to your cables, drums, or opener. By replacing both springs together, you reset your system, ensuring balanced lifting power, maximum cycle life, and fewer repairs down the road.
Yes. Garage door springs weaken over time due to constant stress, metal fatigue from continually winding and unwinding, and exposure to fluctuating temperatures.
When a garage door won't close and nothing is blocking it, the most common culprit is misaligned or dirty safety sensors. These are the small, photo-eye sensors located near the floor on either side of the door.
Garage door springs should be lubricated every 3 to 6 months. If you don't use your garage very often, doing this once or twice a year is generally sufficient. Regular lubrication helps prevent rust and reduces friction, which extends the lifespan of the springs.
Use silicone spray or lithium-based grease specifically designed for garage doors. Apply lubricant to the hinges, rollers, tracks, cables and springs. This will reduce friction and prevent squeaking.
One of the primary causes of spring failure is excessive stress. If a spring is subjected to a load beyond its design capacity, it can weaken, deform, or even break. Overloading often results from applying forces that exceed the spring's yield strength, causing premature failure.
Coil spring replacement typically costs between $300 and $900 per axle (including both parts and labor) for most vehicles. If you need all four springs replaced, expect the total to range from $600 to $1,800. Costs fluctuate depending on your specific vehicle, your local mechanic's labor rates, and the type of suspension your car or truck uses.
Four Early Signs of Spring