How much does it cost to replace a dryer drum bearing?

Author: Ms. Alycia Schamberger  |  Last update: Friday, June 19, 2026

Dryer bearing replacement costs $100 to $300 on average. The bearing costs $15 to $70 for the part or kit alone. Dryers make scraping and squealing noises with failed bearings. Dryer glide bearings are necessary for the drum to spin smoothly.

Is it worth replacing drum bearings on dryer?

You can continue using your dryer for a while, but it's not the best idea. Think about it like it's a tooth pain. Bad bearing is not a big deal at first, but eventually your dryer will break down, possibly burning your clothes too. Either repair your dryer fast or get a new one.

How much does it cost to replace dryer bearings?

Replacing a dryer bearing averages $100 to $250, depending on the make and model.

What is the most expensive part of a dryer?

Like cars, the most expensive part of a dryer is any electrical component, specifically the control board. For newer dryers, this single part, excluding the labor required to replace it, can easily be worth more than half the price of a new unit.

Is it cheaper to repair or replace a dryer?

It's pretty much always cheaper to repair than replace, especially if you are handy enough.

Dryer Repair - Replacing the Drum Bearing (GE Part # WE3M26)

Is it worth repairing a 7 year old dryer?

As with other appliances, the 50% Rule applies: if your appliance is over 50% of its expected lifespan of 10 to 13 years, and it costs more than 50% of its replacement cost to repair it, it may be time to think about replacement.

How much does a service call cost for a dryer?

Most technicians charge between $100 and $150 for a service call, but they may waive this fee if they end up doing the work. Labor costs typically run anywhere from $50 to $100 an hour after that.

What is the life expectancy of a dryer?

The average life expectancy of a dryer is around 10-13 years. And no matter how great your clothes dryer is, all appliances will wear down eventually.

How much does it cost to replace a belt on a dryer drum?

While the part itself costs between $8 and $25, professional dryer belt replacement costs $120 on average, or between $60 and $190, depending on your type of dryer.

What is the most common dryer failure?

Dryer Shuts Off Quickly

Common issues include a broken motor relay, a malfunctioning push-to-start switch or timer, or a clogged exhaust vent that results in overheating. A malfunctioning electrical circuit board, a weakened door catch, or a broken door strike can be the cause.

How much does it cost to replace drum bearings?

Drum Bearings Replacement

Your washing machine's drum bearings last around 10 years. If you hear unusual sounds and recentering the load doesn't fix it, a repair will cost $150 to $200.

How much does a new dryer drum cost?

Dryer drum replacement cost

Dryer drum replacement costs $200 to $500 on average, depending on if an original part from the manufacturer is necessary. The drum part alone costs $130 to $400. Most drum replacements take 30 to 60 minutes.

Can you still use a dryer if the bearings are bad?

If you continue to use a dryer with a worn drum bearing, you could end up burning out the motor.

How long do drum bearings last?

With regular use and proper care, washing machine bearings can typically last 5-10 years, or around 1,000-2,000 wash cycles. However, this is just an estimate, and individual bearings may last longer or shorter, depending on the specific factors mentioned above.

Why is my dryer drum so loud when spinning?

If the subtle whir of your dryer has turned into a loud squeaking, grinding, banging or rumbling noise, there are a few possible causes: Worn bearings, idler pulleys or glides. Loose or unlevel dryer legs. Worn out drum bearings, roller shafts, drive belt or drum glides.

How long should a dryer drum last?

Most dryers last around 10-15 years with regular use and proper maintenance, such as cleaning the lint screen and vent to prevent overheating.

Is it hard to replace a dryer drum belt?

While disassembling your dryer to swap the belt out may seem like a tough DIY gig, you'd be surprised how straightforward this is likely to be. If you've got a screwdriver, putty knife, and patience, you can pull this repair off no problem.

What does a worn dryer belt sound like?

As the drive belt wears, it can become loose, which can lead to squealing.

Is it worth fixing a 10 year old dryer?

If the cost of the repair is going to amount to 50% or more of the cost of a new dryer, then a replacement may be the best long-term option. However, if a replacement isn't going to work with your current budget, a repair is the short-term answer.

What is the best dryer brand?

The Best Dryers of 2025
  • Best Dryer. Electrolux ELFE7637AT.
  • Best Large Capacity Dryer. Maytag MED7230HW.
  • Best Compact Ventless Dryer. Beko HPD24414W.
  • Best Designed Dryer. LG DLEX6700B.
  • Best Dryer for Pet Owners. Maytag Pet Pro MED6500MBK.

Which lasts longer, a washer or a dryer?

Washer, 10-14 years, and Dryer, 10-13 years:

The life of a laundry machine is completely dependent on how often it's run.

How much do appliance repair technicians charge per hour?

Labor. As for the labor involved, most local appliance repair experts charge $50 to $150 per hour.

Can I call someone to fix my dryer?

If your dryer is broken, call a local dryer repair company to fix it.

How much is labor to install a dryer?

The average cost of a new dryer and installation is $1,000. The appliance is $850, and $150 is for labor. If you already have the electricity, plumbing, and venting systems, you will pay around $50 and $100 per hour for the dryer installation, which takes an hour or two to complete.

Previous article
What refrigerant is being phased out?
Next article
Why would water suddenly stop coming out of the faucet?