Changing the depth of a fiberglass pool is more or less the same as building a new pool from scratch. Actual costs will vary dramatically depending on pool size etc, but very rough ballpark numbers are $6K for vinyl, and $20K for plaster.
In many cases, a pool remodel specialist can cut the water depth by several feet. Depending on a pool's existing dimensions, it may even be possible to create an approximate configuration of a play or sports pool. By doing so, you will have an aquatic retreat that's more economical and far more functional.
Yes, making a pool smaller is very common, there may be some limits to what can be done as you should only reduce areas that are capable of withstanding the additional weight placed on the pool structure. Most commonly, older pools may have lots of curved areas and little sections that may be cut off on an angle.
Mix together more concrete, two bags at a time, inside the pool to make it shallower. Pour the concrete into the bottom of the pool, starting at the deep end, directly from the mixer. Slowly build up the depth by pouring in concrete and swirling it smooth with a trowel.
Generally, expect to pay anywhere from $4,500 up to $15,000 for a pool remodeling job. Basic pool resurfacing will run on the lower end of that range while plumbing and technology upgrades will fall on the higher end. A complete backyard pool transformation can run up to $100,000.
Generally, a pool remodeling job is around $4,822 up to $12,259, and the national average is $8,531. The cost of basic resurfacing of an inground pool will fall on the lower end of that range. Pool refurbishing will fall on the higher end. Upgrading your plumbing and pool lights can cost more.
The typical cost to have a pool replastered is between $4 and $7 per square foot. Assuming an average pool size of 16 feet by 32 feet, 4 feet deep on the shallow end and 8 feet on the deep end, that's total of 1,088 square feet. If the cost is $5 per square foot, replastering would cost $5,440.
Diving: 8′- 12′
Food for thought:The average swimming pool ranges from 30′ – 40′ in length. With that being said, the average shallow end is around 3-1/2′ deep. To go from a shallow end at 3.5′ to the deep end at 8′, over such a small distance of the length of the pool.
Traditionally, the average depth of shallow end is 3.5 feet, but you can change it according to your choice and preference. You can always talk with your pool builder to determine how shallow it should be, as you can go as shallow as 2 feet or 2.5 feet too.
The shallow end of a classic backyard pool is 3.5 deep and transits to a deep end of 5 feet or deeper. You can alternatively get a pool with shallow both ends and deeper middle.
When you are swimming, you would get scratched or roughened when you step out of the pool. Also, you could get scratched or your swimsuit could get torn with the jagged plaster. If it's unpleasant to run your hand along the side of the pool or climb up the stairs then its because your plaster is wearing thin.
So, when do you need to re-plaster? Many folks re-plaster the pool during renovation, about every 20 years or so. Some do it more often to keep a nicer finish, or to change colors.
How often is it necessary to resurface a pool? It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced every 3-7 years while fiberglass pools can sometimes go as long as 15-30 years.
A well-maintained concrete pool should last around 50 years or more. And a well constructed in-ground concrete swimming pool should last a lifetime. But, a pool's liner or finish won't last long. And thus, an in-ground concrete pool will need to be resurfaced every 10 to 15 years.
Changing the depth and overall “footprint” or shape of a pool are two of the most common projects. However, swimming pools can be modified or upgraded in many other ways. Sunning ledges are quite popular today, and many owners are having them installed on existing pools.
Maybe you bought a house with a pool that is not large enough to accommodate your needs, or maybe it has a shape that you don't particularly enjoy and you would like to renovate. Whatever the reasons, Neave Pools is here to help. Enlarging a swimming pool or adding a spa can be a large undertaking.
Depending on the size and the style of pool you want, you'll spend an average of $30,000 to $50,000 for an inground pool. Large pools and amenities such as lighting, cabanas, landscaping, waterfalls and slides can easily push prices past $100,000.
Cocktail pools tend to be less than 400 square feet and provide an ideal solution for homeowners with limited outdoor spaces. Sometimes called "spools" for a small pool that combines a pool and a spa, these cocktail pools often include heaters, jets, and benches.
When it comes to construction, take note: Rectangular pools typically cost more than curved pools. The reason why is increased perimeter footage. Rectangles may require more square footage in a backyard. A perfect rectangle provides zero flexibility to incorporate or allow for the intrusion of other structures.