Your cost will depend on things like the size of your pool, where your water is coming from, and whether you're filling it all the way or just topping it off. In total, most homeowners spend between $60 and $1,250 to fill an average-sized swimming pool with water.
1. Have the water trucked in. It fills up the pool quicker and costs the same amount if using your hose. When you use your hose you have to pay sewer fees.
If you don't trust your well, it will cost about $200 to fill a 10,000 gallon pool using a good water company that will deliver drinking water. Be careful, some water delivery people will back up to a local pond to fill up.
Find Out Your Water Bill Rate
For example, if it costs $4 per every 1,000 gallons of water to fill your swimming pool, and your swimming pool is 20,000 gallons, it would be 20,000/1,000 x 4, or $80 to fill your pool.
At an average of $0.004 per gallon, city water is the most inexpensive and most popular option. For 15,000 to 30,000 gallons, you'll pay between $60 and $120.
The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.
Filling your pool with dirt is the fastest and most affordable way to get rid of a pool because there's no need to remove your concrete or metal shell. This saves on both labor and hauling costs. However, filling a pool with dirt is still a delicate process that requires careful preparation, drainage, and demolition.
The typical size is 15 feet by 30 feet. The standard depth is approximately 5.5 feet, with a standard shallow end coming in at 3 feet and deep end at 8 feet. A pool with these dimensions would yield an average amount of 13,500 gallons of water. Next, we investigated the number of pools that exist in America.
Filling a pool from a pond is a fine idea. You may have a little more work getting the water ready for swimming, but people here have done it with success.
Splitting that into two lines will not likely double the flow rate as there is a pressure drop, but it should increase the total flow rate considerably. I would expect it to almost double, but not quite.
Although it may take several hours to fill your pool completely, make sure that someone is available to continuously checking on the pool. It is never recommended to leave your home during this time or to fill your pool overnight.
It would take 31.25 hours to fill a 15,000 gallon swimming pool if your water pressure is 8 gallons per minute and your outside water hose is 480 gallons per hour.
For example, for a 12' x 24' pool 4 ft. high you would multiply 12 x 24 = 288. Then 288 x 4 = 1,152. Then 1,152 x 7.5 = 8,646 gallons needed.
Hook hose to water outlet and fill your above ground pool to 15 inches while working out any wrinkles in the liner. Fill the pool to the middle of the skimmer using your hose or have bulk water delivered. Fill the container with water from the pool and take it to a local pool store for analysis.
What Is The Fastest Way To Fill A Big Pool? The fastest way to fill a big pool is by using a water delivery service, or a city fire hydrant. Note that using city fire hydrants to fill your swimming pool requires special permission from your local fire department, and rules differ from state to state.
It's recommended having a depth fewer than six feet to meet most pool needs. For a family of six to eight people, an 18 foot by 36-foot pool is recommended. This should be sufficient to avoid crowding and allow for the playing of games. Rectangle shaped pools look best for this size.
There is a wide range of inground pool sizes, with some being not much bigger than a traditional swim spa. However, the average small inground pool is around 12 by 24 feet, which should provide plenty of room for swimming, playing, and relaxing for the typical family.
Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.
Additionally, a lack of water means there's a lack of moisture on the pool walls. If left exposed to long periods under the hot sun, pool finishes will dry out, creating cracks and flaking.
If you can pump around 30 GPM (gallons per minute), which is also equivalent to 1800 GPH (gallons per hour), it should take you 2.78 hours or 2 hours and 46 minutes to drain your pool using a hose.
You can fill your pool with a hose from the tap, just like you would with city water. But remember that you'll be moving many thousands of gallons of water through your softener system, so be sure to factor in the cost of salt and the electricity required to pump the water to your pool.
As we said above, you can fill your swimming pool or hot tub with well water. In fact, it's one of the least expensive options, especially compared to a pool water delivery service. Some people choose to fill their pools with city water or municipal water from their house, but not everyone has this option.