How much does it cost to clean out pipes?

Author: Hal Dietrich  |  Last update: Saturday, September 6, 2025

The cost of drain cleaning averages about $241, but it can fall between $147 and $344, depending on the location and extent of your clog.

How much does it cost to clean pipes?

According to a . net plumbing job estimator, the national average charge for a professional to service your sewer line is $196-$289. The lower end for a straightforward drain cleaning is $55, with the maximum around $1300. It all depends on the procedure needed to complete the job as to what the price quote could be.

Is sewer jetting worth it?

Regular sewer jetting can eliminate clogs before they become full on blockages. We also recommend that you jet the sewers when you move into a new home, as you never know what condition the sewer line was left in by the previous owner.

How much does it cost to get drains cleared?

The average cost of drain jetting is around £70 to £175. Drain jetting is the preferred method for professional as it enables them to conduct a thorough clean to get rid of any problematic blockages. It will also clear out any other debris which will prevent any future drain issues.

How often should plumbing pipes be cleaned?

Home » How Often Should Plumbing Pipes Be Cleaned? It's always a good idea to take care of your plumbing before a problem happens because a plumbing problem can turn into an emergency very quickly. You should have your plumbing pipes cleaned every 18 to 22 months or so.

How much does drain cleaning cost in Syracuse NY?

How long does it take to clean pipes?

Cleaning drains typically takes us a few hours, accounting for a few factors such as the size and severity of the blockage. Within those few hours, our team will have set up all the equipment, installed water hoses that go into the drain pipes, and pumped high-pressure water, clearing all the debris and waste.

How do I clean all the pipes in my house?

Flush ALL hot water taps for 15 minutes

Open ALL hot water sink fixtures, hot water bathtub or shower fixtures. Next, open all other hot water fixtures, such as in kitchens, wet bars, etc. Run all of these hot water fixtures for 15 minutes, then shut the water off.

Why is drain cleaning so expensive?

Factors Influencing Drain Cleaning Costs

A simple clog caused by hair or soap buildup can be resolved quickly, resulting in a lower cost. However, severe blockages caused by tree roots, grease buildup, or foreign objects may require more intensive work and specialized equipment, leading to higher charges.

How much does hydro jetting cost?

Hydro jetting costs $475 on average but range from $350 to $600. A plumber can give you a quote and get rid of your sewer clog. Having to keep your plumber on speed dial is no fun for any homeowner. If chronic sewer clogs are giving you issues, it might be time to call in the big guns.

Is jetting or snaking better?

While snaking is still the most effective option for cleaning clogged pipes inside your home, hydro jetting is definitely the much better option for clearing clogged sewer lines.

Why is sewer pipe so expensive?

Wondering why is sewer line replacement so expensive? It boils down to skilled labor costs, quality materials, extensive excavation, and stringent regulations.

Can hydro jetting damage pipes?

Given the amount of force used, hydro jetting can damage frail, aging pipes. Older sewer pipes that are more susceptible to cracks and breaks shouldn't be treated using hydro jetting. In scenarios when pipe age is a concern, traditional cleaning methods should be utilized instead.

How much does Roto-Rooter charge to clean drains?

Roto-Rooter costs $100 to $600 on average for minor fixture repairs or clogged plumbing. Roto-Rooter rates for fixing a toilet or sink are less than for unclogging drains and sewer lines. Plumbing services for emergencies like burst pipes cost $1,000 to $3,500.

Does insurance cover sewer line replacement?

Does homeowners insurance cover your sewer line if it's damaged? Damage to your sewer line may be covered by your policy if it is caused by perils such as hail or windstorms, explosions, lightning or fire, damages caused by vehicles, vandalism or falling objects.

How much does a house cleanout cost?

Home cleanout costs per square foot may vary, but generally, you can expect to pay between $0.20 and $0.50 per square foot, depending on the condition of the property and the volume of items to be cleared.

How much does it cost to clean a sewer line?

Average Cost to Unclog a Sewer Line

Clearing a clogged sewer line costs $250 to $800, depending on where the clog is located, what causes it, and the necessary cleaning.

How do I get my drains checked?

CCTV Drain Inspection & Drain Survey Service

Available in an emergency or a regularly scheduled booking, our local drain doctor team can identify blockages or damage to your drain with a specialist CCTV drain survey. In some cases, a 3D CCTV survey may be used to further identify an issue and formulate a resolution.

How much does it cost to flush pipes?

The cost of drain cleaning averages about $241, but it can fall between $147 and $344, depending on the location and extent of your clog. There is nothing like a backed-up drain to derail your plans. Luckily, there are different solutions that will have you—and your pipes—back on the move in no time.

Is professional drain cleaning worth it?

While DIY methods may provide a temporary fix, professional drain cleaning services aim to provide long-term solutions by addressing the underlying issue that caused the clog. This can save homeowners time and money in the long run by preventing future blockages and potential damage to the pipes.

How often should drain pipes be cleaned?

In addition to cleaning from a pro once per year, keep your drains clean with a weekly and monthly maintenance routine. This maintenance will greatly limit the risk of blockages and damage to plumbing drain pipes throughout your house, as well as buried sewer lines outdoors.

Can you get your pipes cleaned?

Descaling your pipes is not usually something to worry about unless you live in an older home or have hard water. However, if your pipes show signs of corrosion, hiring a local sewer cleaning company to descale your pipes can help you avoid drain clogs and keep your plumbing running smoothly for years to come.

How do you flush out water pipes?

Flush cold water.

Run all cold-water faucets on the property beginning with the faucet closest to the water line. Let all run at the highest flow (or fully open) until water is clear and temperature is constant. Then turn off all faucets in reverse order.

How do you deep clean plumbing pipes?

Mix up a strong batch of baking soda and dish detergent and pour down the drain. Once you do that add a cup of vinegar . The solution safely breaks down grease and soap build up without eating the pipe.

Previous article
What to do if water gets in your vents?
Next article
What is the process for removing a load-bearing wall?