Q: HOW HEAVY IS A FULLY LOADED CONCRETE TRUCK? A: A concrete truck with 10 cubic yards will weigh upwards of 66,000 lbs. or 33 ton.
How much does a concrete truck weigh? If a truck is carrying 10 cubic yards, then the weight of the concrete is approximately 40,000 lb. The truck will weigh approximately 26,000 lb. for a total of 66,000 lb.
A solid, unbroken slab of concrete weighs about two tons (or 4,000 pounds) per cubic yard. Breaking up concrete roughly halves the total weight per cubic yard to about one half ton (or about 2,000 pounds).
You can expect to pay $125 to $3,000 per cubic yard with delivery included. For a full load (10 yards), expect to pay $1,155 to $29,895 including delivery. Several different types of concrete are available, and all are poured, even stamped concrete, in the initial stage.
The upfront cost of ready mix concrete tends to be higher than manual mixing, but there are plenty of ways it saves you money in the long term. One of the biggest benefits is the time you'll save. Ready mix concrete is delivered to your site in a ready-to-use form, eliminating the need for on-site mixing and curing.
A general rule of thumb is on cubic yard of concrete will cover the following areas: 4″ thick – covers 81 square feet. 5″ thick – covers 65 square feet. 6″ thick – covers 54 square feet.
So, you would need about 9 bags of concrete for a 4x4 slab with a thickness of 4 inches if using 80 lb. bags.
Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.
How Thick Does Concrete Need to Be for a Slab? In general, for residential areas like walkways and patios, 4 inches of concrete is sufficient for a slab. For a deck or deck stair landing, again, around 4 inches of concrete is sufficient.
So, you would need roughly 7.11 to 10.67 cubic yards of concrete for a 24x24 slab, depending on whether you go with a thickness of 4 inches or 6 inches. However, it's always a good idea to order a little more concrete than calculated to account for any miscalculations or spillage during pouring.
How much concrete do I need for a 10x10 slab? The amount of concrete you need for a 10x10 slab depends on how thick it will be. So, for a 4-inch slab you'll need 1.24 cubic yards (56 80lb bags), but a 6-inch slab requires 1.85 yards (84 80lb bags).
You'll have a difficult time finding a new truck for under $100,000. If you want to minimize the cost of a concrete truck, consider a well-maintained used option. Used concrete truck costs can range from $30,000 to $150,000, depending on the age, size, and type of truck.
As a general rule of thumb, thirty to sixty minutes of transportation are acceptable on small jobs. At a central or portable ready-mix plant, concrete should be discharged from a truck mixer or agitator truck within two hours. If non-agitating transporting equipment is used, this time is reduced to one hour.
Cement trucks, loaded dump trucks, and other heavy vehicles can cause divots, cracking, and other damage to your driveway.
A 4"-thick concrete driveway for vehicles or ½-ton trucks does not need hot-rolled steel to last for decades. Thicker concrete, driveways with poor ground support, and driveways that often sustain heavy loads or vehicles should be strengthened. What is rebar?
How much does a 30x40 concrete slab cost? The average cost is $4 to $8 per square foot. The median price is about $6 per square foot. Based on these averages, you may pay $4,800 to $9,600 with a median estimate of $7,200.
The minimum thickness for a residential concrete driveway is 4 inches. However, 5 or 6 inches is recommended if you live in an area with heavy traffic or large vehicles. For extra strength and durability, you can go up to 8 inches.
Here's how to do it: Thickness in feet = 4 inches / 12 = ~0.33 feet or 6 inches / 12 = ~0.5 feet. Volume = 40 feet x 60 feet = 2400 square feet. Number of cubic yards = (2400 square feet / 27) * 0.33 feet = 29.63 cubic yards or (2400 square feet / 27) * 0.5 feet = 44.44 cubic yards.
Concrete should be at least 2 inches thick to maintain its stability and quality. Most concrete slabs fall between 4 and 6 inches thick, but you should be careful not to make the new slab too high or heavy.
In addition to being cheaper to install the Quikrete system is also significantly stronger than traditional concrete. Other strength benefits of the Quikrete system are that it sets up much faster (a few hours) and has minimal dust.
When should I buy a bag versus a pallet? If you are working on one or two small jobs, it is more cost efficient to buy by the bag, rather than a full pallet of premixed concrete. However, if you have a full project load ahead of you, buying by the pallet saves money as well as time on trips to the store.
Make sure to use concrete products that are compatible with a liquid bonding agent. Products like Sakrete Sand Mix and Sakrete Fast Set Cement Patcher will work well with a liquid chemical bonding agent such as Sakrete Bonder & Fortifier.