Professional installation adds $8 to $20 per square foot, depending on the amount of prep work required, putting the total average cost to install a tile floor at $10 to $50 per square foot, according to HomeGuide data. Expect to pay $1,500 to $7,500 to install a tile floor in a 10x15-foot room (150 square feet).
Labor. Another significant factor in the cost to install tile flooring is labor costs. The national average cost of labor can run between $4 and $14 per square foot. However, to install ceramic or porcelain tile floors, expect to pay anywhere from $4 to $25 per square foot.
“The labor costs for tile installation can be between $3-$15 per square foot—or, if the contractor charges hourly, it could range between $30-$120 per hour,” Micetich says.
Tiling costs per m² usually work out around £100 per square metre, including the cost of tiles and other materials. But this figure varies a lot depending on each scenario. Tilers charge between £150 – 350 as their day rate for labour only. That's a wide range; a day rate is just one way that tilers charge.
The prices for professional tiling services vary between $30/$45 on average up to $100/$120 per square metre, whereas the hourly rates range from $45 to $100 per hour.
Typically, the installation cost for Lowe's ceramic floor tile ranges from $5 to $10 per square foot.
Tile floors cost an average of $17 per square foot, which means most bathroom floors require $1,100–$3,000 worth of tile work. Vinyl tile installation can cost as low as $2 per square foot, while premium tile can run more than $100.
The golden rule is, try as much as possible to avoid small pieces of tile, or, try to keep them hidden. The same basic idea applies to the vertical lines of your job. Try to minimise any small cuts. It is best to start with a centre line and mark along your wall where each vertical joint will occur.
In the end, whether you tile your walls or floor first is down to you and your preferences. If you're working on it yourself and have more time to spare, then tile the floor first as this makes tiling the walls easier. Just bear in mind that you must wait for the adhesive to dry before you begin working on the walls.
This is simply the square footage of the space divided by the area of each tile. For example, if the square footage of the space is 120 square feet and each tile is 12 inches by 12 inches, the calculation would be 120 square feet / (12 inches x 12 inches) = 120 square feet / 144 square inches = 0.83 tiles.
Tiling is a finishing trade. Tiling work is permanently visible, unlike pipes and cables behind walls or under floors. Because of this, the quality of the work and skill of the tradesperson completing it is what sets the value.
The reason behind the high cost of tile installation is the artistry involved. A skilled tile installer ensures that each piece not only fits perfectly but also contributes to the overall aesthetic of the space.
According to experts, it takes a beginner about 16 hours to lay ceramic or stone tiles in an average room. A person with intermediate skills takes about 12 hours and experts, such as our Lewisville professionals at Pro Flooring, take about 10.
For high-traffic or outdoor areas, porcelain will usually be the better choice because of its durability and moisture resistance. For areas with lighter foot traffic or projects where budget is a concern, ceramic tiles offer a cost-effective and attractive option.
How much do tilers charge per day? As a day rate, tilers tend to charge, on average, between £200 – £350 per day.
It is possible to tile over drywall where it is not subject to extreme humidity and is secure. It is not recommended to lay tiles over walls and areas subject to moisture, such as in showers. The water in these areas could eventually seep into the tile, causing damage to the tile, mold, or infestations.
The average cost of tiling is $40 to $50 per square metre, but this can vary from $30 to $150, depending on the type of tiles and local rates. A more complex installation will be in the range of $100 to $150. Some tilers charge an hourly rate, which may be from $45 to $100 per hour.
To calculate the tile labor cost, multiply the area to be tiled by the rate per square foot for tiling. Then, multiply the total number of transition pieces by the cost per transition piece. Add the two results together to get the total tile labor cost.
On top of materials, the cost of labor for flooring installation can run between $0.60 to $4 per square foot. It will depend on the type of flooring you choose and the difficulty and time it takes to install it.
How many m2 should a tiler do in a day? An experienced tiler can lay around 20-30 m2 in a day. Beginners will lay around 10-15 m2 per day.
The cost to retile a bathroom is $2,000 on average, and most people pay between $450 and $8,000. For a full bathroom retiling with high-end materials, you could end up paying $10,000 or more. You can expect to pay between $10 and $50 per square foot for bathroom retile costs.