For a standard thermostat installation, you can typically charge between $75 and $200 in labor, depending on your location and the complexity of the unit. When including the device itself, professional installers and HVAC companies generally charge a total of $150 to $500 per thermostat.
Replacement of thermostat unit
Upgrading to a new thermostat (unit + installation) typically runs $140 to $350, depending on model and complexity. There is also a broader range—$80 to $440—with variations based on location and type of thermostat.
Millivolt thermostats are the most common type used for gas fireplaces while 24 volt thermostats are common for furnaces or boilers. When the room temperature falls below the thermostat's set temperature, the IPI module triggers the gas fireplace to ignite, increasing the heat output.
Thermostat Replacement starts at $99. To ensure the best service possible, we provide a complimentary 10-point system inspection. This includes: Installation and calibration of your new thermostat.
ecobee Smart Thermostats for Bryant
The ecobee Smart Thermostats, for Bryant, can tailor themselves to your schedule, your personal comfort preferences and the weather outside. They can also provide details on savings each month and insight into your heating and cooling equipment performance.
No, not all thermostats will work with all furnaces. Compatibility depends primarily on your system's voltage, wiring configuration, and the number of heating and cooling "stages" your system utilizes.
Westinghouse sold its remaining interests in Bryant Electric to Hubbell Incorporated in 1991 with the rebranded Distribution and Controls Business Unit going to Eaton in 1994.
Electricians are your best bet for thermostat replacement, and they charge between $65 and $100 per hour for their labor. In most cases, replacing a thermostat will take 1 to 2 hours, which puts your total labor costs between $65 and $200.
The best thermostat brand depends on your smart home ecosystem and heating setup, but Ecobee, Google Nest, and Honeywell Home are the top choices. They offer features like geofencing, remote app control, and energy savings to help lower utility bills.
The labour for replacing a thermostat typically costs between £60 - £150, including VAT. The total cost will depend on a few factors, but the type of thermostat you're installing will usually be the biggest factor.
It costs an average of $0.30 to $0.70 per hour to run a natural gas fireplace, and $1.00 to $2.30 per hour for propane. The exact price depends on your local utility rates, the size of your fireplace, and the type of gas it uses.
Choose a Thermostat Type
3 Places You Should Never Install a Thermostat
Thermostats range from $15 for basic manual units up to $300+ for advanced smart systems. Professional installation adds $50 to $600 depending on your home's wiring and the device type.
In most cases, no. A plumber isn't usually needed for thermostat replacement unless your thermostat directly controls a water-based heating system, such as underfloor heating or a boiler with complex plumbing connections. Even then, an electrician is typically the right professional to handle the wiring.
Millivolt thermostats are typically used with a fireplace or gas-fired floor or wall heater that doesn't use electricity. Older systems with pilot lights may use millivolt controls.
We can confidently say that the Nest Learning Thermostat (available at Amazon) is the best of them all, with an easy setup, intuitive controls, and voice commands. The Nest Learning Thermostat can be controlled by dial or by smart app, and it is our best overall smart thermostat.
One of the most common thermostat-related problems that homeowners run into involves incorrect temperature readings. A thermostat that displays incorrect temperature readings can cause significant heating issues. There are several potential causes of an incorrect temperature reading, starting with improper placement.
Thermostats generally last between 10 to 15 years. However, because HVAC technology advances so quickly, many smart models are replaced earlier to take advantage of energy-saving features, software updates, and better temperature control.
Thermostat installation costs average $184, with a range from $67 to $500, depending on the type and complexity. Basic manual thermostats are less expensive, while smart or programmable models cost more to install. Labor, system compatibility, and additional features can also impact your total price.
Not all thermostats work with all HVAC systems. There are different types of heating and cooling setups, so knowing what system you have is the first step to finding the right thermostat.
Both Eaton and Square D manufacture exceptional, highly reliable electrical panels and circuit breakers. Square D’s premium line (QO) is celebrated for its highly visible trip indicators and robust bolt-in style. Eaton’s premium line (CH) is widely praised for its solid build quality and lifetime warranty.
Production ceased for good on April 22, 1988. Bryant's remaining assets were sold to Hubbell, a longtime competitor with a factory just several hundred yards away.
Neither brand is definitively "better" overall, but they excel in different areas. Trane is superior for durability, heavy-duty build quality, and overall reliability. Bryant is better for budget-conscious buyers, offering premium Carrier-tier features—like excellent humidity and zoning controls—at a lower price point.