Clean and disinfect your toilet bowl with 1/2 cup chlorine bleach. Pour it into the bowl, and let it stand for ten minutes. Then scrub with the toilet brush and flush.
Yes. You should try and avoid using bleach in the toilet when possible, and opting instead to apply a non-chemical cleaner such as soapy water for cleaning purposes. In doing so, you'll avoid causing potential damage to the glazing on the porcelain surface of the toilet.
Can you put bleach in a toilet bowl? Yes, Clorox® Bleach is safe to add to the water in the toilet bowl. Always flush the toilet first before scrubbing, and then again when toilet cleaning is finished.
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
Simply measure out half a cup's worth of bleach and pour it into your toilet bowl, using your toilet brush to scrub it into the bowl and beneath the bowl's rim, also allowing five minutes to pass before you flush it all away.
Leaving bleach in a toilet overnight is fine, but you shouldn't leave it any longer, or else it might corrode your toilet. If you do decide to leave it in the bowl overnight, let other members of your household know so that they don't use the toilet and accidentally mix the bleach with ammonia from urine.
On the flip side, it is also possible to use chlorine bleach in its purest form to clean a loo. And although you can leave this type of bleach to rest in the toilet bowl for a few minutes at a time, it would be better to only use this type of bleach once a week.
White vinegar and baking soda in equal parts is a cost-efficient and effective means of getting rid odors in a toilet. Add them to the tank, mix them in and then use the toilet brush to gently scrub the tank. Let it sit for a few hours, scrub the tank again and flush.
What I recommend, that works well is distilled white vinegar. As far as your toilet to keep it clean inside the bowl. Use 1 cup of white distilled vinegar and poor inside your toilet tank, also pour half of that cup in to the overflow, which is the small, round pipe that stands up in the middle of the tank .
Chloramine gas can also be released when bleach is mixed with urine, such as when cleaning the area around a toilet or when pets stains are cleaned. Both chloramine and chlorine gases are immediately irritating with a very pungent odor, causing watering of the eyes, runny nose and coughing.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
Cleaning vinegar is a natural sanitiser with 6% acetic acid, which makes it 20 times stronger than white vinegar. Like bleach, it can fight grime, kill bacteria and remove mould. It also works great for descaling the toilet and is even a better product than bleach.
Baking soda and vinegar
Add one cup of baking soda to the clogged toilet or slow drain, then wait a few minutes. Follow with two cups of vinegar.
A crack in the toilet bowl might be causing a slow water leak. As a result, the amount of water in the toilet bowl is lower than it should be, allowing foul-smelling sewer gas in from your sewer pipes.
If you want to really get your toilet tank clean, then you need to make sure you have the right cleaning products for the job. Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
In this case, a basic toilet cleaning product may not be enough, and you will need to use undiluted bleach. As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
"For stone surface showers, wipe down the shower after each use and use a pH-neutral cleaning product to remove soap scum," she says. For fiberglass and acrylic showers, use a non-abrasive cleaner like an all-purpose bathroom cleaner or light baking soda solution.
The bleach could react with other chemicals, creating dangerous fumes, and if the reaction is violent, it can even burst your drain pipes.