How Many Guests Can I “Invite” to access my Premis lock? You can invite up to fifteen(15) Apple HomeKit to access your Premis lock through the Home app. You can also provide up to 30 user access codes using the Premis App.
For example, if you want to program User Code 2, press the program button twice. Many Kwikset locks hold 4 User Codes, but some hold as many as 30 at once. The program button is a small black button in the battery compartment of the lock.
Kwikset SmartCode keyless entry locks contain five numbered buttons and a sixth button which Kwikset describes as a "lock button". Each of the numbered buttons contains two numbers such as '12', '34', '56', etc. Owner-programmed code numbers can be from four (4) to eight (8) digits in length.
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
You will hear 3 long beeps after the 5 seconds is completed indicating the lock has been reset. A User Code is used to unlock the door while a Mastercode is a password for making changes to the lock features. Interior of door You will reset your User Code to 1-2-3-4 and Mastercode to 0-0-0-0 when the reset is complete.
Because most of the default code of the keypad door lock are very simple when they are set at the factory, either 00000 or 1234, which can be easily deciphered by strangers, it is very important to change a use code that only you know and is not easy to be guessed by others.
If it's only 1-5, then there are 3125 different combinations. If it's 0-9, then it's 10,000,000,000 different combinations.
Some Kwikset locks, and most other brands as well, are made with a six-pin cylinder so there are more key cut combinations, which make it more difficult to pick and less likely that any two peo- ple will have matching keys.
What is keyed alike? Keyed alike is the term used to describe multiple locks having the same cut so that one key can fit all the locks. Having your locks keyed alike is the most convenient way to handle and manage all your keys.
You can make guesses, but each three consecutive failed attempts will result in the keypad/touchscreen locking out for 60 seconds.If you forgot your user code, there are two options:1.
How many times can I re-key my lock? Unlimited amount of times. All you need is the Smarkey Security tool.
Many locks are made of the same basic parts: pins (usually 12) and springs. The upper six pins are the same size, and the bottom six pins come in varying sizes to match up with the grooves on your particular key. The little springs serve to hold the pins in place.
Most locks use between six and eight pins, although some use as few as four or as many as ten. The devices have been widely used on vending machines, elevators, public computers, and bicycle locks.
You can identity the type of Kwikset lock you have by locating a small vertical slot on the plug. This is located to the left of the cylinder's keyway.
The number of possible combinations is 0000–9999, which is 10,000 possible combinations. However, as TaxmanGr pointed out, one of them is already set, so you only need to try 9,999 other combinations to get the lock to open.
A standard 40-digit Master Lock has 64,000 possible combinations that may open the lock.
A fully progressed two-step 6-pin system will yield a maximum of 4096 cuts while a fully progressed 5-pin system will result in a maximum array of 1024 cut combinations. Not all of the cuts may be usable. For example, although easily cut, a key with cuts of 1-1-1-1-1-1 isn't a good key to issue.
Key codes are found on the side or the bow of the original key that came with your new lock. Some brands do not stamp this code on the side of their keys. If this is the case the only way to get that code is with a key gauge.