On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer. Note that you need to run your pool pump longer during summer because algae grow more in warm temperatures.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
If you want to activate the pump once a day, start with six hours, but never go lower than five hours, especially in the summer. If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance.
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
Trust us when we say it's important to keep your water pump continuously running throughout the pool season. For hotels and other types of public pool spaces, it's actually a law to keep a pump running nonstop; but for homeowners who are concerned about saving energy, resources and money, have no fear.
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.
Heat transfer efficiency is higher with higher flow rates. However, you have to look at total efficiency and cost. It may be worth the extra heat loss to run the pump at lower speeds.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
Without Chemicals
If a parent chooses not to use chemicals in the kiddie pool, the water must be drained after the children are done using it. This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day.
Typically, it's between six and eight hours, and allows water to be circulated a few times per day. The goal here is to make sure your total volume of water circulates three to four times a day, not just once.
A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
Run your filter pump for at least 12 hours a day, every day. This will make sure all the water in your pool circulates at least once. In an ideal world of bottomless money vaults, you could run your pool pump 24 hours a day, but 12 hours is a good compromise.
Low flow = poor circulation which will lead to algae in the pool. Bottom line, the filter must be backwashed on a regular basis to ensure that your pool water is clear. "When do we need to backwash?" - It is recommended to backwash your filter once every 4-6 weeks of regular use.
Should I run my pump while it's raining? Zagers says yes! We recommend that our customers run their pumps rain or shine UNLESS we have an electrical storm. In that case, lightning could strike an outside circuit, which could damage your pump and other equipment.
Run your pool pump continuously when temperatures are near or below freezing. You don't need to run your heater, moving water likely will not freeze. Disconnect any aerators and lines to slides. Booster pumps for pool cleaners don't need to run continuously.
Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.
Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.