Most floating chlorinators can hold anywhere from two to eight weeks worth of chlorine, depending on conditions such as the season and your pool's size. An automatic feeder works in a similar way, allowing it to mix with the pool water slowly and deliberately. This type generally comes in a large bucket.
All pool chemicals, aside from unstabilised liquid chlorine, are good for up to three to five years as long as they're stored in a cool and dark place away from sunlight and they're packed in air-tight containers. Granular chlorine can be re-packed to extend its shelf life.
It's important to check your chlorine levels regularly to ensure that your pool is sufficiently healthy for swimming. During the warmer months it is recommendaed to check the water at least once a week. The optimum chlorine level should be somewhere in between 1 and 3 ppm (parts per million).
Daily as needed and indicated by measurement. One caveat, however: if your total alkalinity and pH are not where they should be, you will find it difficult to keep enough free chlorine in your pool water. Adjust your alkalinity first, then correct your chlorine.
A chlorine level of between 3-5mg/l must be maintained in your hot tub at all times. The addition of chlorine will depend upon usage and bathing habits. It could be daily or every 2-3 days (for 1mg/l add 2g per 1000 litres).
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
We suggest shocking the pool every week to two weeks; with hot weather or increased use, you may need to shock more often. When tabs run out, replace them.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.
But excessive exposure to chlorine can cause sickness and injuries, including rashes, coughing, nose or throat pain, eye irritation and bouts of asthma, health experts warn. Instructions for safely chlorinating a pool usually call for a maximum of four parts per million when people are in the pool.
The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water.
Liquid chlorine is preferred over chlorine tablets by pool professionals however home swimming pools will benefit too. Liquid chlorine quickly raises or maintains chlorine levels without raising stabilizer. Chlorine tablets maintain chlorine levels and add stabilizer to the pool water.
Liquid chlorine does not raise pH. When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH.
Shocking a pool with liquid chlorine or a granular pool shock kills or inactivates pathogens and algae. Shocking will also oxidize other unwanted materials inhabiting the pool water.
Answer: Yes, when using tablets they can be present in the water while you swim. Also confirm with a test of the chlorine level to be sure the sanitizer level is safe for swimming.
Chlorine is essential for pool water because it kills harmful algae, bacteria and microorganisms. ... Make sure your above ground pool has enough by testing your water about every other day with chlorine test strips, such as these Aqua Chek Test Strips. Learn more about maintaining your pool's chemicals.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
When the levels are properly balanced, chlorine will keep the algae at bay, but the water will slowly begin to turn green as the algae take over if there's not enough. But be careful—adding too much chlorine in pool water can cause those metals to oxidize and turn the pool a different shade of green.
One of the causes of a high chlorine demand is an excessive buildup of algae and phosphates. Although you're adding chlorine to your water, bacteria or algae are overpowering the chemicals causing it not to show up on tests strips or in water kits.
Statistically, a pool without chlorine is more likely to make you sick because of the possibility of being exposed to the things not contained or killed by chlorine. Remember, your skin is porous, so microscopic impurities can pass through. A pool sans chlorine is akin to a big puddle of murky water.
A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
What can happen if you go into a pool too soon after it's been shocked? There are a few potential issues. "Chlorine will react with water to produce an acid," Alan says. "The effects will be different depending on whether chlorine is inhaled or whether there is skin or eye contact."